2701489 Phoenix Contact Programmable Logic Controllers

2701489 Product Details

• Number
  2
• Equipment type
  EtherNet/IP™ slave
• System-specific protocols
  EtherNet/IP™ protocols ACD
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Drill hole spacing
  198.5 mm
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Specification
  CIP Edition 3.11EIP adaptation of CIP 1.12
• Current consumption
  typ. 3 mA ±15 % (at 24 V DC)
• ECLASS 7.0
  27242604
• Supply voltage range
  18 V DC ... 31.2 V DC (including all tolerances, including ripple)
• ECLASS 5.0
  27242200
• UNSPSC 21.0
  32151602
• UNSPSC 18.0
  32151602
• Height
  185 mm
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• Mounting type
  Wall mounting or DIN rail mounting; both with mounting plate.
• Designation connection point
  Copper cable
• Connection method
  M12 connector, double occupancy
• Width
  60 mm
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
Permissible humidity (storage/transport)
5 % ... 95 %
Net weight
713.8 g
Designation
Actuators (UA) for additional devices
Number of positions
4
Input name
Digital inputs
Nominal input voltage UIN
24 V DC
Protective circuit
Overload protection, short-circuit protection of outputs yes
ECLASS 9.0
27242604
UNSPSC 12.01
39121311
UNSPSC 20.0
32151602
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
Permissible humidity (operation)
5 % ... 95 %
Housing material
Zinc die-cast
Transmission speed
10/100 Mbps (with auto negotiation)
Supply voltage
24 V DC
ETIM 2.0
EC001433
ETIM 4.0
EC001599
UNSPSC 11
39121311
UNSPSC 19.0
32151602
ECLASS 11.0
27242604
Depth
38 mm
Ambient temperature (operation)
-25 °C ... 60 °C
Degree of protection
IP65/IP67
UNSPSC 13.2
32151602
Note on the connection method
D-coded
Protocols supported
SNMP v1
Connection technology
3-conductor
Input voltage range "0" signal
0 V ... 5 V DC
Nominal output voltage
24 V DC (from voltage US)
Test section
24 V supply (communications power/sensor supply, digital inputs/outputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Reverse voltage resistance to short pulses
Reverse voltage proof
REACh SVHC
Lead 7439-92-1
Input filter time
< 1000 µs
Cable length
max. 30 m (To the sensor)
Nominal load, inductive
12 VA (1.2 H, 48 Ω, with nominal voltage)
Nominal load, ohmic
12 W (48 Ω, with nominal voltage)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
ECLASS 10.0.1
27242604
Output voltage
24 V DC
Output voltage when switched off
max. 1 V
Behavior with overload
Auto restart
Description of the input
EN 61131-2 types 1 and 3
Input voltage range "1" signal
11 V DC ... 30 V DC
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Output name
Digital outputs
Number of inputs
16
Nominal input current at UIN
typ. 3 mA
Number of outputs
16
Output current when switched off
max. 20 µA
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
UNSPSC 6.01
43172015
ECLASS 4.1
27240400
ETIM 7.0
EC001599
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 6.0
27242600
ETIM 6.0
EC001599
Switching frequency
max. 5500 per second (with at least 50 mA load current)
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 5.1
27242600
ETIM 3.0
EC001599
ECLASS 4.0
27240400
UNSPSC 7.0901
43201404

Product condition