2692322 Phoenix Contact Programmable Logic Controllers

2692322 Product Details

• Width
  80 mm
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• Permissible humidity (operation)
  10 % ... 95 % (non-condensing)
• Mounting type
  DIN rail mounting
• Amount of process data
  max. 488 Byte (per station)
• Supply voltage
  24 V DC (via Inline connector)
• Power supply unit
  max. 8 A DC (sum of UM + US)
• Number of inputs
  8
• Input voltage range "1" signal
  15 V DC ... 30 V DC
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Note on weight specifications
  with connectors
• Connection method
  Inline connector
• Number of parameter data
  max. 244 Byte (including 14 bytes for the bus coupler, DP/V1, and the local inputs and outputs)
• Number of supported branch terminals with remote bus branch
  0
• Mechanical tests
  Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
• Height
  119.8 mm
• Power consumption
  typ. 1.7 W (entire device)
• Connection technology
  3-conductor
• Input voltage
  24 V DC
• Number of outputs
  4
Output voltage
24 V DC -1 V (At nominal current)
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 4.1
27250300
ECLASS 6.0
27242600
ECLASS 9.0
27242608
ETIM 6.0
EC001604
UNSPSC 18.0
32151602
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Note on dimensions
Specfications with connectors
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Diagnostics messages
Short-circuit or overload of the digital outputs Yes
Designation
Segment circuit supply (US)
Number of local bus devices that can be connected
max. 61 (The on-board I/Os are two devices)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption
min. 3 mA (without actuators)
Typical response time
approx. 500 µs
Input voltage range "0" signal
-30 V DC ... 5 V DC
Output name
Digital outputs
Limitation of the voltage induced on circuit interruption
approx. -30 V
Connection in acc. with standard
CUL
REACh SVHC
Lead 7439-92-1
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Depth
71.5 mm
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Color
green
Transmission speed
500 kbps / 2 Mbps (automatic detection, no combined system)
Number of configuration data
max. 244 Byte (including 5 bytes for the local inputs and outputs)
Response time of I/Os
typ. 4 ms (aligned I/Os; transmission speed: PROFIBUS 1.5 Mbps, local bus 500 kbps)
ECLASS 11.0
27242608
Input name
Digital inputs
Protective circuit
Short-circuit and overload protection Freewheeling circuit in the output driver
Nominal input voltage UIN
24 V DC
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A, all interfaces 1 kVCriterion B, all interfaces 2 kV
Net weight
343.2 g
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-25 °C ... 60 °C
Degree of protection
IP20
Number
1
ECLASS 5.1
27242600
Delay at signal change from 1 to 0
2.9 ms
Nominal output voltage
24 V DC
Nominal load, ohmic
12 W
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Typical input current per channel
typ. 3 mA
Nominal load, lamp
12 W
Output current when switched off
max. 10 µA (When not loaded, a voltage can be measured even at an output that is not set.)
Behavior with overload
Auto restart
Delay at signal change from 0 to 1
2.9 ms
Reverse voltage resistance to short pulses
Reverse voltage proof
Nominal load, inductive
12 VA (1.2 H, 48 Ω)
Behavior with inductive overload
Output can be destroyed
ETIM 2.0
EC001430
UNSPSC 6.01
43172015
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 4.0
EC001599
UNSPSC 7.0901
43201404
UNSPSC 13.2
32151602
ETIM 3.0
EC001599
ETIM 7.0
EC001604
Number of devices with parameter channel
max. 16
ECLASS 10.0.1
27242608
UNSPSC 12.01
43201404
UNSPSC 19.0
32151602
UNSPSC 21.0
32151602
ECLASS 4.0
27250300
Nominal input current at UIN
typ. 3 mA
UNSPSC 11
43172015
UNSPSC 20.0
32151602
Description of the input
EN 61131-2 type 1
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, supply lines DC: 0.5 kV/0.5 kV (symmetrical/asymmetrical), fieldbus cable shield 1 kV
ECLASS 5.0
27250300
Number of supported devices
max. 63 (per station)
ECLASS 7.0
27242608

Product condition