2320924 Phoenix Contact AC/DC Power Supplies

2320924 Product Details

• ECLASS 7.0
  27049002
• ETIM 6.0
  EC002540
• UNSPSC 12.01
  39121004
• UNSPSC 21.0
  39121004
• Height
  130 mm
• Depth
  125 mm
• Depth with alternative assembly
  72 mm
• Degree of protection
  IP20
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Installation height
  5000 m
• Nominal input voltage range
  3x 400 V AC ... 500 V AC
• AC frequency range
  45 Hz ... 65 Hz
• Frequency range DC
  0 Hz
• Nominal power consumption
  783 VA
• Inrush current
  < 20 A (typical)
• Type of protection
  Transient surge protection
• Setting range of the output voltage (USet)
  18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
• POWER BOOST (IBoost)
  26 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
• Derating
  60 °C ... 70 °C (2.5%/K)
• Connection in series
  yes
Residual ripple
< 40 mVPP (with nominal values)
Typical response time
< 0.16 s
Peak switching voltages nominal load
< 40 mVPP (at nominal values, 20 MHz)
Power loss nominal load max.
40 W
Efficiency
> 93 % (at 400 V AC and nominal values)
Insulation voltage input/output
4 kV AC (type test)
Insulation voltage output / PE
500 V DC (routine test)
Conductor cross section solid max.
6 mm²
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
10
Screw thread
M4
EMC requirements for noise immunity
EN 61000-6-1
Width
69 mm
Width with alternative assembly
125 mm
Height with alternative assembly
130 mm
Installation distance top/bottom
50 mm / 50 mm
Ambient temperature (operation)
-40 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (start-up type tested)
-40 °C
Climatic class
3K3 (in acc. with EN 60721)
Degree of pollution
2
Input voltage range
3x 320 V AC ... 575 V AC
Discharge current to PE
< 3.5 mA
Current consumption
3x 1.6 A (400 V AC)
Recommended breaker for input protection
6 A ... 16 A (AC: Characteristics B, C, D, K)
Nominal output voltage
24 V DC ±1 %
Mains buffering time
typ. 28 ms (400 V AC)
Selective Fuse Breaking (ISFB)
120 A (12 ms)
Connection in parallel
Yes, for redundancy and increased capacity
Feedback voltage resistance
max. 32 V DC
Protection against overvoltage at the output (OVP)
< 32 V DC
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Output power
480 W
Maximum power dissipation in no-load condition
11 W
UNSPSC 18.0
39121004
UNSPSC 13.2
39121004
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
Protection class
I
Insulation voltage input / PE
3.5 kV AC (type test)
Mounting position
horizontal DIN rail NS 35, EN 60715
Connection method
Screw connection
Housing material
Steel sheet, zinc-plated
Conductor cross section flexible max.
4 mm²
Conductor cross section AWG min.
18
EMC requirements for noise emission
EN 61000-6-3
Stripping length
7 mm
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Standard - Safe isolation
DIN VDE 0100-410
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment
EN 50178
Rail applications
EN 50121-4
UL approvals
UL/C-UL listed UL 508
CSA
CAN/CSA-C22.2 No. 60950-1-07
Contact discharge
8 kV (Test Level 4)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Standard - Equipment safety
BG (design tested)
Mains variation/undervoltage
SEMI F47-0706 Compliance Certificate
Shipbuilding approval
DNV GL (EMC B), ABS, LR, RINA, NK, BV
ECLASS 10.0.1
27040701
Protective circuit/component
Varistor, gas-filled surge arrester
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Test field strength
10 V/m (Test Level 3)
Output
1 kV (Test Level 2 - symmetrical)
I/O/S
asymmetrical
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27040701
ETIM 3.0
EC001039
Nominal output current (IN)
20 A (-25 °C ... 60 °C, UOUT = 24 V DC)
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Conducted interference
EN 61000-4-6
Voltage
10 V (Test Level 3)
ECLASS 4.0
27040700
ECLASS 6.0
27049000
ETIM 4.0
EC000599
UNSPSC 11
39121004
Net weight
1.5 kg
Discharge in air
15 kV (Test Level 4)
Comments
Criterion A
Signal
1 kV (Test Level 2 - asymmetrical)
Criterion A
Normal operating behavior within the specified limits.
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 4.1
27040700
ECLASS 5.1
27049000
ETIM 7.0
EC002540
UNSPSC 20.0
39121004
Installation distance right/left
5 mm / 5 mm
Max. permissible relative humidity (operation)
100 % (at 25 °C, non-condensing)
MTBF (IEC 61709, SN 29500)
> 900000 h (25 °C)
Electromagnetic HF field
EN 61000-4-3
Input
3 kV (Test Level 3 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
ECLASS 9.0
27040701
UNSPSC 7.0901
39121004
UNSPSC 19.0
39121004
Electrostatic discharge
EN 61000-4-2
Frequency range
0.15 MHz ... 80 MHz
Fast transients (burst)
EN 61000-4-4
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 5.0
27049000
UNSPSC 6.01
30211502

Product condition