2316311 Phoenix Contact Data & Networking Devices

2316311 Product Details

• Min. AWG conductor cross section, flexible
  24
• Ambient temperature (operation)
  -40 °C ... 80 °C
• Degree of protection
  IP20
• Net weight
  1190 g
• No. of ports
  8
• Max. output voltage Uo
  16.7 V
• Input voltage Ui
  32 V
• Standards/regulations
  Shock and vibration in acc. with EN 61131-2 and EN 50178
• Vibration (operation)
  2g, 10 Hz ... 150 Hz
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.1
  27259205
• ETIM 3.0
  EC001600
• UNSPSC 11
  39121008
• Depth
  66 mm
• Conductor cross section AWG max.
  12
• Output current
  35 mA (per spur)
• Max. external inductivity Lo
  2.27 mH
• Inductance Li
  0 µH
• IECEx
  IECEx UL 16.0114XEx eb ib mb [ia Ga] IIC T4 Gb[Ex ia Da] IIICFISCO power supply (spur)
• Flammability rating according to UL 94
  V0
ECLASS 11.0
27242610
ECLASS 7.0
27242610
ECLASS 9.0
27242610
ETIM 7.0
EC001600
UNSPSC 12.01
39121008
Width
279 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Conductor cross section AWG min.
24
Interface 1
Foundation Fieldbus and PROFIBUS PA Segment
Type of test
Corrosive resistance in acc. to ANSI-ISA 71.04-1985 - Severity level G3
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27242610
Output nominal voltage
≤ 14 V (each spur)
Max. output power Po
1.05 W
ECLASS 6.0
27242600
ETIM 4.0
EC001600
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Permissible humidity (operation)
95 % (non-condensing)
UNSPSC 7.0901
39121008
UNSPSC 20.0
32151602
Overvoltage category
II
Fieldbus Foundation
FF-846
Connection method
Pluggable COMBICON screw connection for each spur
Max. output current Io
250 mA
Max. external capacitance Co
2.33 µF
Safety-related maximum voltage Um
253 V
Height
142 mm
Mounting type
DIN rail mounting
Degree of pollution
2
Conductor cross section solid min.
0.2 mm²
Shock
15g for 11 ms
ECLASS 4.0
27250203
ECLASS 5.0
27250203
ETIM 6.0
EC001600
UNSPSC 18.0
32151602
Conductor cross section flexible max.
2.5 mm²
UNSPSC 21.0
32151602
Termination resistor
Integrated termination, activated with bridge located in correct terminals
Group
IIC
ATEX
DEMKO 16ATEX 1689XII 2(1) G Ex eb ib mb [ia Ga] IIC T4 GbII (1D) [Ex ia Da] IIICFISCO power supply (spur)
Designation
Standards/regulations
UL, USA/Canada
Install in Class I, Div. 2, Groups A, B, C, DEntity/FISCO spur to: Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III; Group IIICClass I, Zone 1 AEx eb ib mb [ia Ga] IIC T4 Gb[AEx ia Da] IIICFISCO power supply (spur)Ex eb ib mb [ia Ga] IIC T4
ECLASS 4.1
27250203
ETIM 2.0
EC001423
UNSPSC 6.01
30211506
UNSPSC 13.2
32151602
UNSPSC 19.0
32151602
Conductor cross section flexible min.
0.2 mm²
Mounting position
On horizontal and vertical DIN rail NS 35 in acc. with EN 60715
Max. current consumption
35 mA (trunk, no load)
Supply voltage range
16 V DC ... 32 V DC (input on trunk line side)
Max. AWG conductor cross section, flexible
12
Conformance
EMC 2014/30/EU
Conductor cross section solid max.
2.5 mm²

Product condition