1628147 Phoenix Contact Electrical Wires & Cables

1628147 Product Details

• Application
  For charging electric vehicles with alternating current (AC)
• Height
  96 mm
• Cable structure
  4 x 0.5 mm²
• Type
  front protective cover screw connection
• Charging mode
  Mode 3, Case B
• Width
  75 mm
• Type of conductor
  Single wires
• Maximum charging power
  8 kW
• Number of signal contacts
  2 (CP, PP)
• Type of signal transmission
  Pulse width modulation
• Max. wall thickness
  max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
• Locking type
  Locking in the inserted state with a locking mechanism
• Reverse current of the motor
  max. 1 A
• Lock recognition
  available
• ECLASS 4.0
  27140800
• ECLASS 9.0
  27144706
• ETIM 4.0
  EC002061
• UNSPSC 21.0
  39121522
• Charging standard
  Type 2
• Standards/regulations
  IEC 62196-2
Conductor length
0.7 m (AC cables)
Max. altitude
5000 m (above sea level)
Number of phases
1
Rated current for signal contacts
2 A
Possible mounting positions
Rear panel mounting
Design line
Generation 1
Operating voltage
12 V (Typical power supply at the motor)
Max. dwell time with reverse current
1000 ms
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27144706
ETIM 3.0
EC002061
UNSPSC 13.2
39121522
Affixed logo
“PHOENIX CONTACT” logo
Depth
76.2 mm
Ambient temperature (operation)
-30 °C ... 50 °C
Degree of protection
IP44 (plugged in)
Rated voltage for power contacts
250 V AC
Insertion force
< 100 N
Mounting hole diameter
7.00 mm (ø)
Customer variations
On request
Possible power supply range at the motor
9 V ... 16 V
Recommended adaptation time
600 ms
Mechanical emergency release
available
ECLASS 5.0
27143400
ECLASS 4.1
27140800
ECLASS 5.1
27143400
ETIM 7.0
EC002898
UNSPSC 7.0901
39121522
UNSPSC 11
39121522
UNSPSC 20.0
39121522
Design
Generation 1
Note on the connection method
Crimp connection, cannot be disconnected
Bore dimensions
60 mm x 60 mm
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Number of power contacts
3 (L1, N, PE)
Rated voltage for signal contacts
30 V AC
Insertion/withdrawal cycles
> 10000
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Housing color
black
Material
Plastic
Typical motor current for locking
0.2 A
Cable length
0.5 m
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 6.0
27143400
ETIM 6.0
EC002898
UNSPSC 12.01
39121522
UNSPSC 19.0
39121522
Type of charging current
AC single-phase
Rated current of power contacts
32 A
Withdrawal force
< 100 N
Mounting position of the locking actuator
Top center
Screw connection of a protective cover
Only possible on the front
Material surface of contacts
Ag
Number of positions of theconnectors
4
Maximum voltage for locking detection
30 V
Pause time after entry or exit path
3 s
Service life insertion cycles
> 10000 load cycles
ECLASS 11.0
27144706
ECLASS 7.0
27449001
UNSPSC 6.01
30211923
UNSPSC 18.0
39121522

Product condition