1628124 Phoenix Contact Electrical Wires & Cables

1628124 Product Details

• Charging standard
  Type 2
• Cable structure
  4 x 0.5 mm²
• Degree of protection
  IP44 (plugged in)
• Number of phases
  1
• Rated current for signal contacts
  2 A
• Restrictions to mounting position
  Only 0 to 90 degree frontal inclination possible, see figure
• Design line
  Generation 1
• Material
  Plastic
• Typical motor current for locking
  0.2 A
• Pause time after entry or exit path
  3 s
• Mechanical emergency release
  available
• ECLASS 4.1
  27140800
• ECLASS 7.0
  27449001
• UNSPSC 12.01
  39121522
• UNSPSC 21.0
  39121522
• Type
  rear protective cover screw connection
• Note on the connection method
  Crimp connection, cannot be disconnected
• Depth
  76.2 mm
• Maximum charging power
  8 kW
• Rated voltage for power contacts
  250 V AC
Type of signal transmission
Pulse width modulation
Mounting position of the locking actuator
Top center
Housing color
black
Operating voltage
12 V (Typical power supply at the motor)
Maximum voltage for locking detection
30 V
Lock recognition
available
ECLASS 11.0
27144706
ECLASS 5.1
27143400
ETIM 4.0
EC002061
ETIM 6.0
EC002898
UNSPSC 19.0
39121522
Standards/regulations
IEC 62196-2
Charging mode
Mode 3, Case B
Type of conductor
Single wires
Max. altitude
5000 m (above sea level)
Type of charging current
AC single-phase
Insertion/withdrawal cycles
> 10000
Withdrawal force
< 100 N
Possible mounting positions
Rear panel mounting
Locking type
Locking in the inserted state with a locking mechanism
Reverse current of the motor
max. 1 A
Service life insertion cycles
> 10000 load cycles
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 5.0
27143400
ETIM 3.0
EC002061
UNSPSC 7.0901
39121522
UNSPSC 18.0
39121522
Design
Generation 1
Width
75 mm
Bore dimensions
60 mm x 60 mm
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Number of power contacts
3 (L1, N, PE)
Insertion force
< 100 N
Screw connection of a protective cover
Only rear mounting possible
Customer variations
On request
Material surface of contacts
Ag
Recommended adaptation time
600 ms
ECLASS 10.0.1
27144706
ECLASS 4.0
27140800
ECLASS 9.0
27144706
ETIM 7.0
EC002898
UNSPSC 13.2
39121522
UNSPSC 20.0
39121522
Application
For charging electric vehicles with alternating current (AC)
Height
96 mm
Conductor length
0.7 m (AC cables)
Ambient temperature (operation)
-30 °C ... 50 °C
Rated current of power contacts
32 A
Number of signal contacts
2 (CP, PP)
Rated voltage for signal contacts
30 V AC
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Mounting hole diameter
7.00 mm (ø)
Number of positions of theconnectors
4
Possible power supply range at the motor
9 V ... 16 V
Max. dwell time with reverse current
1000 ms
Cable length
0.5 m
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27143400
UNSPSC 6.01
30211923
UNSPSC 11
39121522

Product condition