1627693 Phoenix Contact Electrical Wires & Cables

1627693 Product Details

• Standards/regulations
  IEC 62196-2
• Application
  For charging electric vehicles (EV) with alternating current (AC)
• Charging standard
  Type 2
• Width
  75 mm
• Maximum charging power
  22 kW
• Number of power contacts
  5 (L1, L2, L3, N, PE)
• Rated current of power contacts
  32 A
• Withdrawal force
  < 100 N (Optimized)
• Design
  Generation 1 Easy Mount
• Depth
  76.2 mm
• Conductor length
  0.7 m (AC cables)
• Type of conductor
  Single wires
• Number of phases
  3
• Number of signal contacts
  2 (CP, PP)
• Insertion/withdrawal cycles
  > 10000
• Screw connection of a protective cover
  Only possible on the front
• Design line
  Generation 1 Easy Mount
• Material surface of contacts
  Ag
• Possible power supply range at the motor
  9 V ... 16 V
• Max. dwell time with reverse current
  1000 ms
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 10.0.1
27144706
ECLASS 9.0
27144706
UNSPSC 6.01
30211923
UNSPSC 18.0
39121522
Height
96 mm
Bore dimensions
60 mm x 60 mm
Ambient temperature (operation)
-30 °C ... 50 °C
Type of charging current
AC 3-phase
Rated voltage for signal contacts
30 V AC
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Customer variations
On request
Typical motor current for locking
0.2 A
Cable length
0.5 m
ECLASS 4.0
27140800
ETIM 4.0
EC002061
UNSPSC 12.01
39121522
UNSPSC 21.0
39121522
Type
front protective cover screw connection
Affixed logo
“PHOENIX CONTACT” logo
Note on the connection method
Crimp connection, cannot be disconnected
Cable structure
4 x 0.5 mm²
Max. altitude
5000 m (above sea level)
Rated voltage for power contacts
480 V AC
Type of signal transmission
Pulse width modulation
Possible mounting positions
Rear panel mounting
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Material
Plastic
Operating voltage
12 V (Typical power supply at the motor)
Maximum voltage for locking detection
30 V
Pause time after entry or exit path
3 s
Service life insertion cycles
> 10000 load cycles
ECLASS 11.0
27144706
ECLASS 6.0
27143400
ECLASS 7.0
27449001
UNSPSC 7.0901
39121522
UNSPSC 13.2
39121522
Charging mode
Mode 3, Case B
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Degree of protection
IP44 (plugged in)
Rated current for signal contacts
2 A
Insertion force
< 100 N (Optimized)
Mounting position of the locking actuator
Top center
Housing color
black
Locking type
Locking in the inserted state with a locking mechanism
Reverse current of the motor
max. 1 A
Lock recognition
available
ECLASS 5.0
27143400
ETIM 3.0
EC002061
UNSPSC 11
39121522
UNSPSC 19.0
39121522
Mounting hole diameter
7.00 mm (ø)
Number of positions of theconnectors
4
Recommended adaptation time
600 ms
Mechanical emergency release
available
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27140800
ECLASS 5.1
27143400
ETIM 6.0
EC002898
ETIM 7.0
EC002898
UNSPSC 20.0
39121522

Product condition