1627633 Phoenix Contact Electrical Wires & Cables

1627633 Product Details

• Type
  front protective cover screw connection
• Charging mode
  Mode 3, Case B
• Width
  75 mm
• Cable structure
  4 x 0.5 mm²
• Number of phases
  3
• Rated current of power contacts
  32 A
• Rated voltage for signal contacts
  30 V AC
• Restrictions to mounting position
  Only 0 to 90 degree frontal inclination possible, see figure
• Screw connection of a protective cover
  Only possible on the front
• Housing color
  black
• Number of positions of theconnectors
  4
• Typical motor current for locking
  0.2 A
• Max. dwell time with reverse current
  1000 ms
• Mechanical emergency release
  available
• ECLASS 4.0
  27140800
• ECLASS 4.1
  27140800
• ETIM 4.0
  EC002061
• UNSPSC 6.01
  30211923
• Design
  Generation 1 Easy Mount
• Bore dimensions
  60 mm x 60 mm
Ambient temperature (operation)
-30 °C ... 50 °C
Type of conductor
Single wires
Number of signal contacts
2 (CP, PP)
Insertion/withdrawal cycles
> 10000
Withdrawal force
< 100 N
Mounting hole diameter
7.00 mm (ø)
Locking type
Locking in the inserted state with a locking mechanism
Possible power supply range at the motor
9 V ... 16 V
Recommended adaptation time
600 ms
Cable length
0.5 m
China RoHS
Environmentally Friendly Use Period = 10;
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27143400
ECLASS 9.0
27144706
UNSPSC 18.0
39121522
Affixed logo
“PHOENIX CONTACT” logo
Height
96 mm
Depth
76.2 mm
Maximum charging power
22 kW
Number of power contacts
5 (L1, L2, L3, N, PE)
Insertion force
< 100 N
ETIM 7.0
EC002898
UNSPSC 12.01
39121522
Standards/regulations
IEC 62196-2
Charging standard
Type 2
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Degree of protection
IP44 (plugged in)
Type of charging current
AC 3-phase
Rated current for signal contacts
2 A
Mounting position of the locking actuator
Top center
Customer variations
On request
Material surface of contacts
Ag
Operating voltage
12 V (Typical power supply at the motor)
Reverse current of the motor
max. 1 A
Lock recognition
available
ECLASS 10.0.1
27144706
ECLASS 5.0
27143400
ECLASS 7.0
27449001
ETIM 6.0
EC002898
UNSPSC 11
39121522
UNSPSC 20.0
39121522
UNSPSC 21.0
39121522
Application
For charging electric vehicles (EV) with alternating current (AC)
Note on the connection method
Crimp connection, cannot be disconnected
Conductor length
0.7 m (AC cables)
Max. altitude
5000 m (above sea level)
Rated voltage for power contacts
480 V AC
Type of signal transmission
Pulse width modulation
Possible mounting positions
Rear panel mounting
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Design line
Generation 1 Easy Mount
Material
Plastic
Maximum voltage for locking detection
30 V
Service life insertion cycles
> 10000 load cycles
Pause time after entry or exit path
3 s
ECLASS 11.0
27144706
ECLASS 5.1
27143400
ETIM 3.0
EC002061
UNSPSC 7.0901
39121522
UNSPSC 19.0
39121522
UNSPSC 13.2
39121522

Product condition