1624043 Phoenix Contact Electrical Wires & Cables

1624043 Product Details

• Height
  96 mm
• Type of conductor
  Single wires
• Number of phases
  3
• Rated current for signal contacts
  2 A
• Type of signal transmission
  Pulse width modulation
• Restrictions to mounting position
  Only 0 to 90 degree frontal inclination possible, see figure
• Number of positions of theconnectors
  4
• Max. dwell time with reverse current
  1000 ms
• Mechanical emergency release
  available
• ECLASS 4.0
  27140800
• ECLASS 7.0
  27449001
• ETIM 7.0
  EC002898
• UNSPSC 12.01
  39121522
• UNSPSC 19.0
  39121522
• Type
  rear protective cover screw connection
• Design
  Generation 1
• Note on the connection method
  Crimp connection, cannot be disconnected
• Bore dimensions
  60 mm x 60 mm
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Degree of protection
  IP44 (plugged in)
Rated voltage for signal contacts
30 V AC
Possible mounting positions
Rear panel mounting
Customer variations
On request
Material surface of contacts
Ag
Locking type
Locking in the inserted state with a locking mechanism
Lock recognition
available
ECLASS 11.0
27144706
ECLASS 6.0
27143400
ETIM 3.0
EC002061
UNSPSC 18.0
39121522
Standards/regulations
IEC 62196-2
Depth
76.2 mm
Ambient temperature (operation)
-30 °C ... 50 °C
Type of charging current
AC 3-phase
Number of power contacts
5 (L1, L2, L3, N, PE)
Rated current of power contacts
32 A
Insertion force
< 100 N
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Mounting hole diameter
7.00 mm (ø)
Design line
Generation 1
Maximum voltage for locking detection
30 V
Typical motor current for locking
0.2 A
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 10;
ETIM 4.0
EC002061
UNSPSC 13.2
39121522
UNSPSC 21.0
39121522
Affixed logo
“PHOENIX CONTACT” logo
Charging mode
Mode 3, Case B
Width
75 mm
Cable structure
4 x 0.5 mm²
Maximum charging power
22 kW
Number of signal contacts
2 (CP, PP)
Withdrawal force
< 100 N
Mounting position of the locking actuator
Top center
Material
Plastic
Possible power supply range at the motor
9 V ... 16 V
Recommended adaptation time
600 ms
Pause time after entry or exit path
3 s
Service life insertion cycles
> 10000 load cycles
ECLASS 5.1
27143400
ECLASS 9.0
27144706
UNSPSC 6.01
30211923
UNSPSC 7.0901
39121522
Application
For charging electric vehicles (EV) with alternating current (AC)
Charging standard
Type 2
Conductor length
1 m (AC cables)
Max. altitude
5000 m (above sea level)
Rated voltage for power contacts
480 V AC
Insertion/withdrawal cycles
> 10000
Screw connection of a protective cover
Only rear mounting possible
Housing color
black
Operating voltage
12 V (Typical power supply at the motor)
Reverse current of the motor
max. 1 A
Cable length
0.5 m
ECLASS 10.0.1
27144706
ECLASS 4.1
27140800
ECLASS 5.0
27143400
ETIM 6.0
EC002898
UNSPSC 11
39121522
UNSPSC 20.0
39121522

Product condition