1622176 Phoenix Contact Electrical Wires & Cables

1622176 Product Details

• Affixed logo
  “PHOENIX CONTACT” logo
• Height
  96 mm
• Conductor length
  1.5 m (AC cables)
• Cable structure
  4 x 0.5 mm²
• Rated voltage for power contacts
  480 V AC
• Rated current for signal contacts
  2 A
• Mounting position of the locking actuator
  Top center
• Mounting hole diameter
  7.00 mm (ø)
• Number of positions of theconnectors
  4
• Cable length
  0.5 m
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.0
  27143400
• ECLASS 6.0
  27143400
• ETIM 4.0
  EC002061
• UNSPSC 11
  39121522
• Type
  rear protective cover screw connection
• Charging standard
  Type 2
• Depth
  76.2 mm
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Number of phases
  3
Number of power contacts
5 (L1, L2, L3, N, PE)
Withdrawal force
< 100 N
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Housing color
black
Operating voltage
12 V (Typical power supply at the motor)
Typical motor current for locking
0.2 A
Max. dwell time with reverse current
1000 ms
Recommended adaptation time
600 ms
ECLASS 10.0.1
27144706
ECLASS 7.0
27449001
ETIM 7.0
EC002898
UNSPSC 21.0
39121522
Standards/regulations
IEC 62196-2
Bore dimensions
60 mm x 60 mm
Maximum charging power
22 kW
Number of signal contacts
2 (CP, PP)
Possible mounting positions
Rear panel mounting
Screw connection of a protective cover
Only rear mounting possible
Material
Plastic
Possible power supply range at the motor
9 V ... 16 V
Service life insertion cycles
> 10000 load cycles
ECLASS 11.0
27144706
ETIM 6.0
EC002898
UNSPSC 6.01
30211923
UNSPSC 19.0
39121522
Application
For charging electric vehicles (EV) with alternating current (AC)
Charging mode
Mode 3, Case B
Type of conductor
Single wires
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Degree of protection
IP44 (plugged in)
Type of signal transmission
Pulse width modulation
Insertion force
< 100 N
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Material surface of contacts
Ag
Locking type
Locking in the inserted state with a locking mechanism
Pause time after entry or exit path
3 s
Lock recognition
available
ECLASS 4.0
27140800
ECLASS 4.1
27140800
ECLASS 9.0
27144706
UNSPSC 12.01
39121522
UNSPSC 13.2
39121522
Design
Generation 1
Note on the connection method
Crimp connection, cannot be disconnected
Width
75 mm
Max. altitude
5000 m (above sea level)
Type of charging current
AC 3-phase
Rated current of power contacts
32 A
Rated voltage for signal contacts
30 V AC
Insertion/withdrawal cycles
> 10000
Design line
Generation 1
Customer variations
On request
Maximum voltage for locking detection
30 V
Reverse current of the motor
max. 1 A
Mechanical emergency release
available
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 5.1
27143400
ETIM 3.0
EC002061
UNSPSC 7.0901
39121522
UNSPSC 18.0
39121522
UNSPSC 20.0
39121522

Product condition