1621729 Phoenix Contact Electrical Wires & Cables

1621729 Product Details

• Application
  For charging electric vehicles (EV) with alternating current (AC)
• Charging standard
  Type 2
• Conductor length
  0.7 m (AC cables)
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Maximum charging power
  22 kW
• Design
  Generation 1
• Height
  96 mm
• Type of conductor
  Single wires
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Number of power contacts
  5 (L1, L2, L3, N, PE)
• Rated voltage for signal contacts
  30 V AC
• Possible mounting positions
  Front and rear mounting
• Charging mode
  Mode 3, Case B
• Bore dimensions
  60 mm x 60 mm
• Max. altitude
  5000 m (above sea level)
• Rated voltage for power contacts
  480 V AC
• Insertion/withdrawal cycles
  > 10000
• Insertion force
  < 100 N
• Customer variations
  On request
• Material
  Plastic
Maximum voltage for locking detection
30 V
Affixed logo
“PHOENIX CONTACT” logo
Note on the connection method
Crimp connection, cannot be disconnected
Cable structure
4 x 0.5 mm²
Degree of protection
IP44 (plugged in)
Type of charging current
AC 3-phase
Number of signal contacts
2 (CP, PP)
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Mounting hole diameter
7.00 mm (ø)
Design line
Generation 1
Max. dwell time with reverse current
1000 ms
Service life insertion cycles
> 10000 load cycles
Mechanical emergency release
available
ECLASS 5.0
27143400
ETIM 6.0
EC002898
UNSPSC 18.0
39121522
Type
rear protective cover screw connection
Standards/regulations
IEC 62196-2
Width
75 mm
Depth
76.2 mm
Number of phases
3
Type of signal transmission
Pulse width modulation
Mounting position of the locking actuator
Not pre-assembled, top center mounting possible
Screw connection of a protective cover
Only possible on the front
Locking type
Locking in the inserted state with a locking mechanism
Operating voltage
12 V (Typical power supply at the motor)
Pause time after entry or exit path
3 s
ECLASS 4.0
27140800
ECLASS 4.1
27140800
ETIM 3.0
EC002061
UNSPSC 6.01
30211923
UNSPSC 13.2
39121522
Rated current of power contacts
32 A
Rated current for signal contacts
2 A
Withdrawal force
< 100 N
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Material surface of contacts
Ag
Possible power supply range at the motor
9 V ... 16 V
Recommended adaptation time
600 ms
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 5.1
27143400
ETIM 4.0
EC002061
UNSPSC 7.0901
39121522
UNSPSC 20.0
39121522
Housing color
black
Number of positions of theconnectors
4
Typical motor current for locking
0.2 A
Cable length
0.5 m
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27144706
ECLASS 9.0
27144706
ETIM 7.0
EC002898
UNSPSC 12.01
39121522
UNSPSC 21.0
39121522
Reverse current of the motor
max. 1 A
Lock recognition
available
ECLASS 11.0
27144706
ECLASS 6.0
27143400
ECLASS 7.0
27449001
UNSPSC 11
39121522
UNSPSC 19.0
39121522

Product condition