1534591 Phoenix Contact Data & Networking Devices
Part#:1534591
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Bus system flush-type socket, Ethernet, 4-pos., M12, shielded, D-coded, rear/screw mounting with M16 thread, with 1 m bus cable, 2 x 2 x 0.14 mm²
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1534591 Phoenix Contact price in the box on the right side or send a quick quote.
1534591 Product Details
- Rated current at 40°C 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
- Number of positions 4
- Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
- Coding D - data
- Degree of pollution 3
- Length of cable 1 m
- Standards/regulations M12 connector IEC 61076-2-101
- Rated voltage 48 V AC
- Status display No
- Material, knurls Nickel-plated brass
- Cable type (abbreviation) 93E
- Degree of protection IP67 (When plugged in)
- Overvoltage category II
- Contact surface material Ni/Au
- Conductor cross section 2x 2x 0.14 mm²
- Nominal voltage, cable ≤ 100 V (Peak value, not for high-power applications)
- Resistance to oil according to EN 60811-2-1
- ECLASS 10.0.1 27440102
- ECLASS 4.1 27140800
- ETIM 4.0 EC000830
- UNSPSC 11 31251501
- Outer sheath thickness 1.2 mm
- Halogen-free according to IEC 60754-1
- Shielded yes
- ECLASS 11.0 27440102
- ETIM 6.0 EC002061
- UNSPSC 12.01 31251501
- Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation)
- Insulation resistance ≥ 500 MΩ*km
- UNSPSC 20.0 39121413
- Signal type/category Ethernet CAT5 (IEC 11801), 100 Mbps
- Transmission characteristics (category) CAT5
- Test voltage 2500 V
- UNSPSC 6.01 31251501
- Return loss (RL) 23 dB (at 4 МHz)
- UNSPSC 18.0 39121413
- Contact carrier material PA 6.6
- Conductor structure signal line 7x 0.16 mm
- Cable structure 2x2xAWG26/7; SF/UTP
- Core diameter including insulation 0.98 mm
- Test voltage Core/Shield 700 V (50 Hz, 1 min.)
- External cable diameter D 6.4 mm ±0.2 mm
- Ambient temperature (installation) -20 °C ... 80 °C
- ECLASS 4.0 27140800
- ECLASS 9.0 27440102
- ECLASS 7.0 27440103
- AWG signal line 26
- Flame resistance according to IEC 60332-1-2
- Ambient temperature (storage/transport) -20 °C ... 80 °C
- UNSPSC 19.0 39121413
- Contact material CuZn
- Sealing material NBR
- Standards/specifications Electrical requirements EN 50288-2-2
- UNSPSC 21.0 39121413
- Material conductor insulation Foamed PE
- Near end crosstalk attenuation (NEXT) 65.3 dB (with 1 MHz)
- REACh SVHC Lead 7439-92-1
- Coupling resistance ≤ 100.00 mΩ/m (at 10 MHz)
- Current carrying capacity of cable 2 A (according to DIN VDE 0891-1)
- ECLASS 5.0 27143400
- ETIM 2.0 EC001297
- UNSPSC 7.0901 31251501
- UNSPSC 13.2 39121413
- ETIM 3.0 EC002061
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 6.0 27279200
- ECLASS 5.1 27143400
- Optical shield covering 70 %
- Loop resistance ≤ 290.00 Ω/km
- Wave impedance 100 Ω ±5 Ω (at 100 MHz)
- Test voltage Core/Core 700 V (50 Hz, 1 min.)
- Flammability rating according to UL 94 V0
- UL AWM style 20963 (80°C/30 V)
- Minimum bending radius, fixed installation 4 x D
- Cable capacity approx. 45 nF/km (at 1 kHz)
- Signal runtime 5.3 ns/m
- Cable type Ethernet flexible CAT5, 2-pair
- Twisted pairs 2 cores to the pair
- Tensile strength GRP ≤ 80 N
- Shielding Aluminum-coated foil, tinned copper braided shield
- Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
- External sheath, color water blue RAL 5021
- Outer sheath, material PUR
- Power-summated near end crosstalk attenuation (PSNEXT) 62.3 dB (with 1 MHz)
- Conductor material Bare Cu litz wires
- Overall twist Two pairs with two fillers to the core
- Minimum bending radius, flexible installation 8 x D
- Cable weight 42 kg/km
- Attenuation 3.2 dB (with 1 MHz)
- Wire colors white/orange-orange, white/green-green
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
1534591
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨