Nikki Gonzales
Nick Goetz
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

1534562 Phoenix Contact Electrical Connectors

Phoenix Contact 1534562 Bus system flush-type female connector, INTERBUS, 5-pos., M12, shielded, B-coded, rear/screw mounting with M16 thread, with 2 m bus line
Phoenix Contact

Part#:1534562

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Get a quick Quote!

About the product: Bus system flush-type female connector, INTERBUS, 5-pos., M12, shielded, B-coded, rear/screw mounting with M16 thread, with 2 m bus line

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Connectors that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 1534562 Phoenix Contact price in the box on the right side or send a quick quote.

1534562 Product Details

  • Note
    The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
  • Rated voltage
    48 V AC
  • Signal type/category
    INTERBUS
  • Flammability rating according to UL 94
    V0
  • Sealing material
    FKM
  • Cable structure
    3 x 2 x 0.22 mm²
  • Twisted pairs
    2 cores to the pair
  • Minimum bending radius, fixed installation
    7.5 x D
  • Traversing rate
    1.6 m/s
  • Conductor material
    Bare Cu litz wires
  • Attenuation
    ≤ 15 dB/km (at 256 kHz)
  • Test voltage Core/Shield
    1000 Vrms
  • ECLASS 10.0.1
    27440102
  • ECLASS 5.1
    27143400
  • ETIM 3.0
    EC002061
  • UNSPSC 11
    31251501
  • UNSPSC 20.0
    39121413
  • Rated current at 40°C
    4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
  • Coding
    B - inverse
  • Degree of pollution
    3
  • Contact material
    CuZn
  • Standards/specifications
    M12 connector IEC 61076-2-101
  • Conductor cross section
    3x 2x 0.22 mm²
  • Overall twist
    3 pairs to the core
  • Minimum bending radius, flexible installation
    15 x D
  • Acceleration
    3.2 m/s²
  • Loop resistance
    ≤ 159.80 Ω/km
  • Signal speed
    0.66 c
  • Flame resistance
    according to VDE 0472, Part 4, test type B
  • ECLASS 11.0
    27440102
  • ECLASS 6.0
    27279200
  • ETIM 4.0
    EC000830
  • UNSPSC 12.01
    31251501
  • UNSPSC 21.0
    39121413
  • Length of cable
    2 m
  • Rated surge voltage
    1.5 kV
  • Standards/regulations
    M12 connector IEC 61076-2-101
  • Test voltage
    2500 V
  • Contact surface material
    Ni/Au
  • Safety note
    WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
  • AWG signal line
    24
  • Shielding
    Braided copper wires
  • Number of bending cycles
    5000000
  • Cable weight
    70 kg/km
  • Cable capacity
    ≤ 60 nF/km (At 800 Hz)
  • Nominal voltage, cable
    250 V (Peak value, not for high-power applications)
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 4.1
    27140800
  • ECLASS 9.0
    27440102
  • UNSPSC 6.01
    31251501
  • UNSPSC 18.0
    39121413
  • Ambient temperature (operation)
    -40 °C ... 80 °C (cable, fixed installation)
  • Number of positions
    5
  • Status display
    No
  • Insertion/withdrawal cycles
    > 100
  • Contact carrier material
    PA 6.6
  • Cable type
    INTERBUS
  • Conductor structure signal line
    32x 0.10 mm
  • External sheath, color
    may green RAL 6017
  • Bending radius
    120 mm
  • Outer sheath, material
    PUR
  • Wave impedance
    120 Ω ±20 % (at 64 kHz)
  • Coupling resistance
    < 250.00 mΩ/m (at 30 MHz)
  • Shielded
    yes
  • ECLASS 4.0
    27140800
  • ECLASS 7.0
    27440103
  • ETIM 6.0
    EC002061
  • UNSPSC 13.2
    39121413
  • Degree of protection
    IP67 (When plugged in)
  • Insulation resistance
    ≥ 5 GΩ*km
  • Overvoltage category
    II
  • Torque
    2 Nm ... 3 Nm (Installation-side)
  • Material, knurls
    Nickel-plated brass
  • Cable type (abbreviation)
    900
  • Wire colors
    Green-yellow, white-brown, gray-pink
  • External cable diameter D
    8 mm
  • Traversing path
    10 m
  • Material conductor insulation
    PE
  • Near end crosstalk attenuation (NEXT)
    ≥ 61 dB (at 772 kHz)
  • Test voltage Core/Core
    1500 Vrms
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 5.0
    27143400
  • ETIM 2.0
    EC001297
  • UNSPSC 7.0901
    31251501
  • UNSPSC 19.0
    39121413

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

1534562

Select Qty:

Average response time: 11 minutes

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo