Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

1534520 Phoenix Contact Electrical Connectors

Phoenix Contact 1534520 Bus system flush-type male connector, INTERBUS, 5-pos., M12, shielded, B-coded, rear/screw mounting with M16 thread, with 2 m bus line
Phoenix Contact

Part#:1534520

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Bus system flush-type male connector, INTERBUS, 5-pos., M12, shielded, B-coded, rear/screw mounting with M16 thread, with 2 m bus line

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 1534520 Phoenix Contact price in the box on the right side or send a quick quote.

1534520 Product Details

  • Rated current at 40°C
    4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
  • Number of positions
    5
  • Status display
    No
  • Degree of pollution
    3
  • Contact material
    CuZn
  • Conductor cross section
    3x 2x 0.22 mm²
  • Cable structure
    3 x 2 x 0.22 mm²
  • Cable weight
    70 kg/km
  • Near end crosstalk attenuation (NEXT)
    ≥ 61 dB (at 772 kHz)
  • Wave impedance
    120 Ω ±20 % (at 64 kHz)
  • Flame resistance
    according to VDE 0472, Part 4, test type B
  • ECLASS 11.0
    27440102
  • ECLASS 5.1
    27143400
  • ETIM 2.0
    EC001297
  • UNSPSC 6.01
    31251501
  • UNSPSC 13.2
    39121413
  • Note
    The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
  • Coding
    B - inverse
  • Overvoltage category
    II
  • Torque
    2 Nm ... 3 Nm (Installation-side)
  • Contact surface material
    Ni/Au
  • Material conductor insulation
    PE
  • Cable capacity
    ≤ 60 nF/km (At 800 Hz)
  • Coupling resistance
    < 250.00 mΩ/m (at 30 MHz)
  • Nominal voltage, cable
    250 V (Peak value, not for high-power applications)
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 5.0
    27143400
  • ETIM 4.0
    EC000830
  • UNSPSC 7.0901
    31251501
  • UNSPSC 19.0
    39121413
  • Length of cable
    2 m
  • Rated surge voltage
    1.5 kV
  • Test voltage
    2500 V
  • Sealing material
    FKM
  • Contact carrier material
    PA 6.6
  • Conductor material
    Bare Cu litz wires
  • Attenuation
    ≤ 15 dB/km (at 256 kHz)
  • Test voltage Core/Shield
    1000 Vrms
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 4.1
    27140800
  • ECLASS 7.0
    27440103
  • ETIM 3.0
    EC002061
  • UNSPSC 18.0
    39121413
  • Ambient temperature (operation)
    -40 °C ... 80 °C (cable, fixed installation)
  • Standards/regulations
    M12 connector IEC 61076-2-101
  • Insulation resistance
    ≥ 5 GΩ*km
  • Flammability rating according to UL 94
    V0
  • Material, knurls
    Nickel-plated brass
  • Cable type (abbreviation)
    900
  • Outer sheath, material
    PUR
  • Signal speed
    0.66 c
  • Shielded
    yes
  • ECLASS 4.0
    27140800
  • ECLASS 9.0
    27440102
  • UNSPSC 11
    31251501
  • UNSPSC 21.0
    39121413
  • Signal type/category
    INTERBUS
  • Insertion/withdrawal cycles
    > 100
  • Loop resistance
    ≤ 159.80 Ω/km
  • Test voltage Core/Core
    1500 Vrms
  • ECLASS 10.0.1
    27440102
  • ECLASS 6.0
    27279200
  • ETIM 6.0
    EC002061
  • UNSPSC 12.01
    31251501
  • UNSPSC 20.0
    39121413
  • Cable type
    INTERBUS
  • Conductor structure signal line
    32x 0.10 mm
  • Shielding
    Braided copper wires
  • Overall twist
    3 pairs to the core
  • Bending radius
    120 mm
  • Degree of protection
    IP67 (When plugged in)
  • Rated voltage
    48 V AC
  • Wire colors
    Green-yellow, white-brown, gray-pink
  • Minimum bending radius, fixed installation
    7.5 x D
  • Number of bending cycles
    5000000
  • Traversing path
    10 m
  • Safety note
    WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
  • AWG signal line
    24
  • External cable diameter D
    8 mm
  • Minimum bending radius, flexible installation
    15 x D
  • Traversing rate
    1.6 m/s
  • Standards/specifications
    M12 connector IEC 61076-2-101
  • Twisted pairs
    2 cores to the pair
  • External sheath, color
    may green RAL 6017
  • Acceleration
    3.2 m/s²

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo