Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

1534504 Phoenix Contact Electrical Connectors

Phoenix Contact 1534504 Bus system flush-type male connector, INTERBUS, 5-pos., M12, shielded, B-coded, rear/screw mounting with M16 thread, with 0.5 m bus line
Phoenix Contact

Part#:1534504

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Bus system flush-type male connector, INTERBUS, 5-pos., M12, shielded, B-coded, rear/screw mounting with M16 thread, with 0.5 m bus line

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 1534504 Phoenix Contact price in the box on the right side or send a quick quote.

1534504 Product Details

  • Note
    The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
  • Number of positions
    5
  • Signal type/category
    INTERBUS, 16 Mbps
  • Test voltage
    2500 V
  • Contact material
    CuZn
  • Safety note
    WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
  • Overall twist
    3 pairs to the core
  • External sheath, color
    may green RAL 6017
  • External cable diameter D
    8 mm
  • Acceleration
    3.2 m/s²
  • Near end crosstalk attenuation (NEXT)
    ≥ 61 dB (at 772 kHz)
  • Test voltage Core/Shield
    1000 Vrms
  • ECLASS 4.1
    27140800
  • ETIM 3.0
    EC002061
  • ETIM 6.0
    EC002061
  • UNSPSC 20.0
    39121413
  • Rated current at 40°C
    4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
  • Status display
    No
  • Degree of pollution
    3
  • Standards/specifications
    M12 connector IEC 61076-2-101
  • Cable type (abbreviation)
    900
  • Cable structure
    3 x 2 x 0.22 mm²
  • Twisted pairs
    2 cores to the pair
  • Traversing rate
    1.6 m/s
  • Material conductor insulation
    PE
  • Coupling resistance
    < 250.00 mΩ/m (at 30 MHz)
  • ECLASS 10.0.1
    27440102
  • ECLASS 5.1
    27143400
  • ETIM 2.0
    EC001297
  • UNSPSC 13.2
    39121413
  • UNSPSC 21.0
    39121413
  • REACh SVHC
    Lead 7439-92-1
  • Ambient temperature (operation)
    -40 °C ... 80 °C (cable, fixed installation)
  • Standards/regulations
    M12 connector IEC 61076-2-101
  • Coding
    B - inverse
  • Flammability rating according to UL 94
    V0
  • Material, knurls
    Nickel-plated brass
  • Cable type
    INTERBUS
  • AWG signal line
    24
  • Minimum bending radius, fixed installation
    7.5 x D
  • Bending radius
    120 mm
  • Traversing path
    10 m
  • Loop resistance
    ≤ 159.80 Ω/km
  • Test voltage Core/Core
    1500 Vrms
  • ECLASS 11.0
    27440102
  • ECLASS 6.0
    27279200
  • UNSPSC 6.01
    31251501
  • UNSPSC 11
    31251501
  • Length of cable
    0.5 m
  • Rated voltage
    48 V AC
  • Rated surge voltage
    1.5 kV
  • Torque
    2 Nm ... 3 Nm (Installation-side)
  • Contact surface material
    Ni/Au
  • Sealing material
    FKM
  • Conductor structure signal line
    32x 0.10 mm
  • Shielding
    Braided copper wires
  • Number of bending cycles
    5000000
  • Outer sheath, material
    PUR
  • Cable capacity
    ≤ 60 nF/km (At 800 Hz)
  • Attenuation
    ≤ 15 dB/km (at 256 kHz)
  • Signal speed
    0.66 c
  • Flame resistance
    according to VDE 0472, Part 4, test type B
  • ECLASS 5.0
    27143400
  • ECLASS 9.0
    27440102
  • UNSPSC 12.01
    31251501
  • UNSPSC 18.0
    39121413
  • Degree of protection
    IP67 (When plugged in)
  • Insulation resistance
    ≥ 5 GΩ*km
  • Overvoltage category
    II
  • Insertion/withdrawal cycles
    > 100
  • Contact carrier material
    PA 6.6
  • Conductor cross section
    3x 2x 0.22 mm²
  • Wire colors
    Green-yellow, white-brown, gray-pink
  • Minimum bending radius, flexible installation
    15 x D
  • Cable weight
    70 kg/km
  • Conductor material
    Bare Cu litz wires
  • Wave impedance
    120 Ω ±20 % (at 64 kHz)
  • Nominal voltage, cable
    250 V (Peak value, not for high-power applications)
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 4.0
    27140800
  • ECLASS 7.0
    27440103
  • ETIM 4.0
    EC000830
  • UNSPSC 7.0901
    31251501
  • UNSPSC 19.0
    39121413

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo