1530223 Phoenix Contact Electrical Connectors

1530223 Product Details

• Rated surge voltage
  1.5 kV
• Coding
  B - inverse
• Flammability rating according to UL 94
  V0
• Standards/specifications
  M12 connector IEC 61076-2-101
• Rated current at 40°C
  4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
• Insulation resistance
  ≥ 5 GΩ*km
• Overvoltage category
  II
• Test voltage
  2500 V
• Contact carrier material
  PA 6.6
• Cable type
  INTERBUS
• Conductor structure signal line
  32x 0.10 mm
• Minimum bending radius, fixed installation
  7.5 x D
• Degree of protection
  IP67
• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Standards/regulations
  M12 connector IEC 61076-2-101
• Signal type/category
  INTERBUS
• Insertion/withdrawal cycles
  > 100
• Sealing material
  NBR
• External cable diameter D
  8 mm
• Traversing path
  10 m
Material conductor insulation
PE
Near end crosstalk attenuation (NEXT)
≥ 61 dB (at 772 kHz)
Coupling resistance
< 250.00 mΩ/m (at 30 MHz)
ECLASS 11.0
27440102
ECLASS 6.0
27279200
ETIM 3.0
EC002061
UNSPSC 7.0901
31251501
UNSPSC 20.0
39121413
Length of cable
1 m
Number of positions
5
Degree of pollution
3
Wire colors
Green-yellow, white-brown, gray-pink
External sheath, color
may green RAL 6017
Number of bending cycles
5000000
Outer sheath, material
PUR
Wave impedance
120 Ω ±20 % (at 64 kHz)
Shielded
yes
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27440103
ETIM 2.0
EC001297
UNSPSC 18.0
39121413
Rated voltage
48 V AC
Status display
No
Contact material
CuZn
Minimum bending radius, flexible installation
15 x D
Cable weight
70 kg/km
Loop resistance
≤ 159.80 Ω/km
Attenuation
≤ 15 dB/km (at 256 kHz)
Nominal voltage, cable
250 V (Peak value, not for high-power applications)
ECLASS 10.0.1
27440102
ECLASS 5.1
27143400
ECLASS 9.0
27440102
ETIM 6.0
EC002061
UNSPSC 12.01
31251501
UNSPSC 13.2
39121413
Traversing rate
1.6 m/s
Conductor material
Bare Cu litz wires
Cable capacity
≤ 60 nF/km (At 800 Hz)
Test voltage Core/Shield
1000 Vrms
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27140800
ETIM 4.0
EC000830
UNSPSC 6.01
31251501
UNSPSC 21.0
39121413
Signal speed
0.66 c
Test voltage Core/Core
1500 Vrms
ECLASS 4.0
27140800
ECLASS 5.0
27143400
UNSPSC 11
31251501
UNSPSC 19.0
39121413
AWG signal line
24
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Twisted pairs
2 cores to the pair
Contact surface material
Ni/Au
Conductor cross section
3x 2x 0.22 mm²
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Torque
3 Nm ... 4 Nm (Installation-side)
Cable type (abbreviation)
900
Overall twist
3 pairs to the core
Flame resistance
according to VDE 0472, Part 4, test type B
Material, knurls
Nickel-plated brass
Cable structure
3 x 2 x 0.22 mm²
Shielding
Braided copper wires
Bending radius
120 mm
Acceleration
3.2 m/s²

Product condition