1529768 Phoenix Contact Electrical Connectors

1529768 Product Details

• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Insulation resistance
  ≥ 5 GΩ*km
• Standards/regulations
  M12 connector IEC 61076-2-101
• Insertion/withdrawal cycles
  > 100
• Material, knurls
  Nickel-plated brass
• Cable structure
  3 x 2 x 0.22 mm²
• Wire colors
  Green-yellow, white-brown, gray-pink
• Shielding
  Braided copper wires
• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Number of positions
  5
• Degree of pollution
  3
• Status display
  No
• Contact carrier material
  PA 6.6
• Safety note
  WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• Conductor structure signal line
  32x 0.10 mm
• Minimum bending radius, flexible installation
  15 x D
• Traversing path
  10 m
• Outer sheath, material
  PUR
• Attenuation
  ≤ 15 dB/km (at 256 kHz)
• Test voltage Core/Shield
  1000 Vrms
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27140800
ECLASS 9.0
27060311
ETIM 6.0
EC001855
UNSPSC 19.0
31251501
Degree of protection
IP67
Rated voltage
48 V AC
Signal type/category
INTERBUS
Flammability rating according to UL 94
V0
Standards/specifications
M12 connector IEC 61076-2-101
AWG signal line
24
Overall twist
3 pairs to the core
Minimum bending radius, fixed installation
7.5 x D
Traversing rate
1.6 m/s
Conductor material
Bare Cu litz wires
Signal speed
0.66 c
Test voltage Core/Core
1500 Vrms
ECLASS 11.0
27060311
ECLASS 6.0
27279200
ETIM 7.0
EC001855
UNSPSC 7.0901
31251501
UNSPSC 21.0
31251501
Length of cable
2 m
Rated surge voltage
1.5 kV
Overvoltage category
II
Torque
3 Nm ... 4 Nm (Installation-side)
Sealing material
NBR
Cable type (abbreviation)
900
Twisted pairs
2 cores to the pair
External cable diameter D
8 mm
Cable weight
70 kg/km
Loop resistance
≤ 159.80 Ω/km
Near end crosstalk attenuation (NEXT)
≥ 61 dB (at 772 kHz)
Flame resistance
according to VDE 0472, Part 4, test type B
ECLASS 10.0.1
27060311
ECLASS 5.1
27143400
ETIM 4.0
EC000830
UNSPSC 11
31251501
UNSPSC 20.0
31251501
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Coding
B - inverse
Test voltage
2500 V
Contact material
CuZn
Contact surface material
Ni/Au
Cable type
INTERBUS
Conductor cross section
3x 2x 0.22 mm²
External sheath, color
may green RAL 6017
Bending radius
120 mm
Material conductor insulation
PE
Wave impedance
120 Ω ±20 % (at 64 kHz)
Coupling resistance
< 250.00 mΩ/m (at 30 MHz)
Shielded
yes
ECLASS 4.0
27140800
ECLASS 7.0
27279218
UNSPSC 6.01
31251501
UNSPSC 12.01
31251501
Number of bending cycles
5000000
Acceleration
3.2 m/s²
Cable capacity
≤ 60 nF/km (At 800 Hz)
Nominal voltage, cable
250 V (Peak value, not for high-power applications)
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27143400
ETIM 2.0
EC001297
ETIM 3.0
EC002061
UNSPSC 13.2
39121413

Product condition