1529755 Phoenix Contact Electrical Connectors

1529755 Product Details

• Length of cable
  1 m
• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Number of positions
  5
• Signal type/category
  INTERBUS
• Test voltage
  2500 V
• Contact carrier material
  PA 6.6
• Standards/specifications
  M12 connector IEC 61076-2-101
• Cable structure
  3 x 2 x 0.22 mm²
• External cable diameter D
  8 mm
• Bending radius
  120 mm
• Minimum bending radius, flexible installation
  15 x D
• Material conductor insulation
  PE
• Signal speed
  0.66 c
• ETIM 2.0
  EC001297
• UNSPSC 11
  31251501
• UNSPSC 21.0
  31251501
• Rated current at 40°C
  4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
• Insulation resistance
  ≥ 5 GΩ*km
• Degree of pollution
  3
• Insertion/withdrawal cycles
  > 100
Flammability rating according to UL 94
V0
Cable type (abbreviation)
900
Conductor cross section
3x 2x 0.22 mm²
External sheath, color
may green RAL 6017
Traversing path
10 m
Cable weight
70 kg/km
Loop resistance
≤ 159.80 Ω/km
Near end crosstalk attenuation (NEXT)
≥ 61 dB (at 772 kHz)
Test voltage Core/Shield
1000 Vrms
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27140800
ECLASS 6.0
27279200
ETIM 4.0
EC000830
UNSPSC 6.01
31251501
UNSPSC 19.0
31251501
Rated voltage
48 V AC
Status display
No
Contact material
CuZn
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Twisted pairs
2 cores to the pair
Number of bending cycles
5000000
Outer sheath, material
PUR
Coupling resistance
< 250.00 mΩ/m (at 30 MHz)
Flame resistance
according to VDE 0472, Part 4, test type B
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27143400
ECLASS 9.0
27060311
ETIM 6.0
EC001855
UNSPSC 13.2
39121413
Degree of protection
IP67
Standards/regulations
M12 connector IEC 61076-2-101
Torque
3 Nm ... 4 Nm (Installation-side)
Sealing material
NBR
Conductor structure signal line
32x 0.10 mm
Shielding
Braided copper wires
Wave impedance
120 Ω ±20 % (at 64 kHz)
Conductor material
Bare Cu litz wires
Test voltage Core/Core
1500 Vrms
ECLASS 10.0.1
27060311
ECLASS 4.1
27140800
ETIM 7.0
EC001855
UNSPSC 20.0
31251501
Coding
B - inverse
Overvoltage category
II
Contact surface material
Ni/Au
Material, knurls
Nickel-plated brass
Cable type
INTERBUS
AWG signal line
24
Wire colors
Green-yellow, white-brown, gray-pink
Overall twist
3 pairs to the core
Minimum bending radius, fixed installation
7.5 x D
Acceleration
3.2 m/s²
Traversing rate
1.6 m/s
Cable capacity
≤ 60 nF/km (At 800 Hz)
Attenuation
≤ 15 dB/km (at 256 kHz)
Nominal voltage, cable
250 V (Peak value, not for high-power applications)
Shielded
yes
ECLASS 11.0
27060311
ECLASS 7.0
27279218
ETIM 3.0
EC002061
UNSPSC 7.0901
31251501
UNSPSC 12.01
31251501
ECLASS 5.1
27143400
Rated surge voltage
1.5 kV
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)

Product condition