1529629 Phoenix Contact Electrical Connectors

1529629 Product Details

• Rated current at 40°C
  4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
• Insulation resistance
  ≥ 5 GΩ*km
• Torque
  3 Nm ... 4 Nm (Installation-side)
• Contact material
  CuZn
• Cable type (abbreviation)
  900
• Degree of protection
  IP67
• Standards/regulations
  M12 connector IEC 61076-2-101
• Overvoltage category
  II
• Flammability rating according to UL 94
  V0
• Material, knurls
  Nickel-plated brass
• Standards/specifications
  M12 connector IEC 61076-2-101
• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Number of positions
  5
• Coding
  B - inverse
• Degree of pollution
  3
• Sealing material
  NBR
• Signal type/category
  INTERBUS
• Status display
  No
• Insertion/withdrawal cycles
  > 100
• Cable type
  INTERBUS
Conductor cross section
3x 2x 0.22 mm²
Minimum bending radius, fixed installation
7.5 x D
Minimum bending radius, flexible installation
15 x D
Outer sheath, material
PUR
Shielded
yes
ECLASS 7.0
27279218
ECLASS 6.0
27279200
UNSPSC 13.2
39121413
UNSPSC 11
31251501
Length of cable
0.5 m
Test voltage
2500 V
Contact carrier material
PA 6.6
Cable structure
3 x 2 x 0.22 mm²
Shielding
Braided copper wires
Number of bending cycles
5000000
ETIM 3.0
EC002061
UNSPSC 7.0901
31251501
UNSPSC 20.0
31251501
Twisted pairs
2 cores to the pair
Overall twist
3 pairs to the core
ECLASS 5.1
27143400
ETIM 2.0
EC001297
ETIM 7.0
EC001855
UNSPSC 12.01
31251501
UNSPSC 21.0
31251501
ECLASS 4.0
27140800
UNSPSC 6.01
31251501
UNSPSC 19.0
31251501
ECLASS 9.0
27060311
ETIM 6.0
EC001855
ETIM 4.0
EC000830
Rated voltage
48 V AC
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Conductor structure signal line
32x 0.10 mm
Acceleration
3.2 m/s²
Conductor material
Bare Cu litz wires
Loop resistance
≤ 159.80 Ω/km
Test voltage Core/Shield
1000 Vrms
Nominal voltage, cable
250 V (Peak value, not for high-power applications)
ECLASS 11.0
27060311
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
AWG signal line
24
External sheath, color
may green RAL 6017
Traversing path
10 m
Material conductor insulation
PE
Wave impedance
120 Ω ±20 % (at 64 kHz)
Coupling resistance
< 250.00 mΩ/m (at 30 MHz)
Test voltage Core/Core
1500 Vrms
ECLASS 10.0.1
27060311
ECLASS 5.0
27143400
Rated surge voltage
1.5 kV
Traversing rate
1.6 m/s
Cable capacity
≤ 60 nF/km (At 800 Hz)
Signal speed
0.66 c
Flame resistance
according to VDE 0472, Part 4, test type B
REACh SVHC
Lead 7439-92-1
Contact surface material
Ni/Au
Wire colors
Green-yellow, white-brown, gray-pink
External cable diameter D
8 mm
Bending radius
120 mm
Cable weight
70 kg/km
Near end crosstalk attenuation (NEXT)
≥ 61 dB (at 772 kHz)
Attenuation
≤ 15 dB/km (at 256 kHz)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27140800

Product condition