1528497 Phoenix Contact Data & Networking Devices

1528497 Product Details

• Conductor cross section
  2x 2x 0.14 mm²
• Return loss (RL)
  23 dB (at 4 МHz)
• Nominal voltage, cable
  ≤ 100 V (Peak value, not for high-power applications)
• Ambient temperature (storage/transport)
  -20 °C ... 80 °C
• ECLASS 4.1
  27140800
• UNSPSC 19.0
  39121413
• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Rated voltage
  48 V AC
• External cable diameter D
  6.4 mm ±0.2 mm
• Conductor material
  Bare Cu litz wires
• ETIM 3.0
  EC002061
• Status display
  No
• Degree of pollution
  3
• AWG signal line
  26
• UL AWM style
  20963 (80°C/30 V)
• Core diameter including insulation
  0.98 mm
• Overall twist
  Two pairs with two fillers to the core
• Attenuation
  3.2 dB (with 1 MHz)
• Test voltage Core/Core
  700 V (50 Hz, 1 min.)
• Halogen-free
  according to IEC 60754-1
Shielded
yes
ECLASS 11.0
27440102
ECLASS 9.0
27440102
UNSPSC 13.2
39121413
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Coding
D - data
Overvoltage category
II
Contact surface material
Ni/Au
Minimum bending radius, fixed installation
4 x D
Material conductor insulation
Foamed PE
ETIM 4.0
EC000830
UNSPSC 20.0
39121413
Wire colors
white/orange-orange, white/green-green
Optical shield covering
70 %
Coupling resistance
≤ 100.00 mΩ/m (at 10 MHz)
Flame resistance
according to IEC 60332-1-2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27140800
UNSPSC 21.0
39121413
ECLASS 6.0
27279200
ECLASS 5.1
27143400
ETIM 6.0
EC002061
UNSPSC 12.01
31251501
UNSPSC 11
31251501
Standards/regulations
M12 connector IEC 61076-2-101
Test voltage
2500 V
Material, knurls
Nickel-plated brass
Cable type (abbreviation)
93E
Minimum bending radius, flexible installation
8 x D
Cable weight
42 kg/km
Tensile strength GRP
≤ 80 N
Cable type
Ethernet flexible CAT5, 2-pair
Wave impedance
100 Ω ±5 Ω (at 100 MHz)
Cable capacity
approx. 45 nF/km (at 1 kHz)
Degree of protection
IP67
Insulation resistance
≥ 500 MΩ*km
Cable structure
2x2xAWG26/7; SF/UTP
Shielding
Aluminum-coated foil, tinned copper braided shield
Outer sheath thickness
1.2 mm
Loop resistance
≤ 290.00 Ω/km
Current carrying capacity of cable
2 A (according to DIN VDE 0891-1)
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27440103
UNSPSC 7.0901
31251501
Signal type/category
Ethernet CAT5 (IEC 11801), 100 Mbps
Contact material
CuZn
Standards/specifications
Electrical requirements EN 50288-2-2
Power-summated near end crosstalk attenuation (PSNEXT)
62.3 dB (with 1 MHz)
Length of cable
1 m
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Number of positions
4
Twisted pairs
2 cores to the pair
Conductor structure signal line
7x 0.16 mm
External sheath, color
water blue RAL 5021
Outer sheath, material
PUR
Signal runtime
5.3 ns/m
Near end crosstalk attenuation (NEXT)
65.3 dB (with 1 MHz)
Test voltage Core/Shield
700 V (50 Hz, 1 min.)
Resistance to oil
according to EN 60811-2-1
ECLASS 10.0.1
27440102
ECLASS 5.0
27143400
ETIM 2.0
EC001297
UNSPSC 6.01
31251501
UNSPSC 18.0
39121413
Transmission characteristics (category)
CAT5
Flammability rating according to UL 94
V0
Sealing material
NBR
Ambient temperature (installation)
-20 °C ... 80 °C
Contact carrier material
PA 6.6
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

Product condition