1525636 Phoenix Contact Data & Networking Devices

1525636 Product Details

• Traversing path
  4.5 m
• Acceleration
  3 m/s²
• Loop resistance
  ≤ 181.80 Ω/km (Data cable)
• Flame resistance
  UL 1581, Sec. 1060 (FT-1)
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.0
  27143400
• ETIM 4.0
  EC000830
• UNSPSC 11
  31251501
• UNSPSC 21.0
  39121413
• Cable weight
  90 kg/km
• Cable capacity
  nom. 40 nF/km (Data cable)
• Test voltage Core/Core
  2000 V (50 Hz, 1 min.)
• Halogen-free
  in accordance with DIN VDE 0472 part 815
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 4.1
  27140800
• ETIM 2.0
  EC001297
• UNSPSC 6.01
  31251501
• UNSPSC 20.0
  39121413
• Bending radius
  70 mm
• Material conductor insulation
  Foamed PE (Data cable)
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
Other resistance
Low adhesion
Shielded
yes
ECLASS 11.0
27440102
ECLASS 7.0
27440103
ETIM 6.0
EC002061
UNSPSC 19.0
39121413
Traversing rate
3 m/s
Conductor material
Tin-plated Cu litz wires
Attenuation
≤ 22.9 dB/km (with 1 MHz)
ECLASS 10.0.1
27440102
Minimum bending radius, drag chain applications
10 x D
Outer sheath, material
PUR
Wave impedance
120 Ω ±10 % (with 1 MHz)
ECLASS 4.0
27140800
ETIM 3.0
EC002061
Length of cable
1 m
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Degree of pollution
3
Insertion/withdrawal cycles
> 100
Contact material
CuZn
Standards/specifications
M12 connector IEC 61076-2-101
UNSPSC 7.0901
31251501
UNSPSC 13.2
39121413
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Overvoltage category
II
Torque
3 Nm ... 4 Nm (Installation-side)
Thread type
M16 x 1.5
Flammability rating according to UL 94
V0
External cable diameter D
6.7 mm ±0.3 mm
Mounting type
Front mounting M16 x 1.5 With locking nut
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Contact carrier material
PA 6.6
Rated voltage
48 V AC
Status display
No
Cable type
CANopen®/DeviceNet™, PUR, violet
AWG signal line
24
External sheath, color
violet RAL 4001
Number of bending cycles
5000000
ECLASS 6.0
27279200
ECLASS 9.0
27440102
Insulation resistance
≥ 5 GΩ*km (Data cable)
Connection method
CAN Bus / DeviceNet
Minimum bending radius, fixed installation
5 x D
UNSPSC 12.01
31251501
Minimum bending radius, flexible installation
10 x D
ECLASS 5.1
27143400
Standards/regulations
M12 connector IEC 61076-2-101
Cable type (abbreviation)
920
Cable structure
2xAWG24/19+2xAWG22/19
Shielding
Tinned copper braided shield
UNSPSC 18.0
39121413
Degree of protection
IP67
Number of positions
5
Sealing material
NBR
Conductor structure signal line
19x 0.13 mm
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Coding
A - standard
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
AWG power supply
22
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
Twisted pairs
2 cores to the pair
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
Rated surge voltage
1.5 kV
Test voltage
2500 V
Contact surface material
Ni/Au
UL AWM style
21198 (80°C/300 V)
Conductor cross section
2x 0.25 mm² (Data cable)
Conductor structure, voltage supply
19x 0.15 mm
Type of pair shielding
Plastic-coated aluminum foil, aluminum side outside
Overall twist
2 pairs around a drain wire in the center to the core
Material, knurls
Nickel-plated brass
Signal type/category
CANopen®
Wire colors
Red-black, blue-white
Optical shield covering
80 %

Product condition