Nikki Gonzales
Nick Goetz
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

1437630 Phoenix Contact Electrical Connectors

Phoenix Contact 1437630 Bus system flush-type female connector, INTERBUS, 5-pos., M12, shielded, B-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 5.0 m bus line
Phoenix Contact

Part#:1437630

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Get a quick Quote!

About the product: Bus system flush-type female connector, INTERBUS, 5-pos., M12, shielded, B-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 5.0 m bus line

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Connectors that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 1437630 Phoenix Contact price in the box on the right side or send a quick quote.

1437630 Product Details

  • Degree of protection
    IP67 (When plugged in)
  • Rated voltage
    48 V AC
  • Coding
    B - inverse
  • Torque
    2 Nm ... 3 Nm (Installation-side)
  • Length of cable
    5 m
  • Rated current at 40°C
    4 A
  • Insulation resistance
    ≥ 5 GΩ*km
  • Degree of pollution
    3
  • Contact material
    CuZn
  • Standards/specifications
    M12 connector IEC 61076-2-101
  • Rated surge voltage
    1.5 kV
  • Signal type/category
    INTERBUS
  • Insertion/withdrawal cycles
    > 100
  • Sealing material
    FKM
  • Cable type (abbreviation)
    900
  • Note
    The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
  • Shielded
    yes
  • Ambient temperature (operation)
    -40 °C ... 80 °C (cable, fixed installation)
  • Standards/regulations
    M12 connector IEC 61076-2-101
  • Overvoltage category
    II
  • Contact surface material
    Ni/Au
  • Overall twist
    3 pairs to the core
  • External cable diameter D
    8 mm
  • AWG signal line
    24
  • Conductor structure signal line
    32x 0.10 mm
  • Shielding
    Braided copper wires
  • Minimum bending radius, fixed installation
    7.5 x D
  • Traversing rate
    1.6 m/s
  • Outer sheath, material
    PUR
  • Near end crosstalk attenuation (NEXT)
    ≥ 61 dB (at 772 kHz)
  • Test voltage Core/Shield
    1000 Vrms
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 4.1
    27140800
  • ETIM 3.0
    EC002061
  • UNSPSC 11
    31251501
  • UNSPSC 18.0
    39121413
  • Flammability rating according to UL 94
    V0
  • Material, knurls
    Nickel-plated brass
  • Cable structure
    3 x 2 x 0.22 mm²
  • Twisted pairs
    2 cores to the pair
  • Number of bending cycles
    5000000
  • Loop resistance
    ≤ 159.80 Ω/km
  • Wave impedance
    120 Ω ±20 % (at 64 kHz)
  • Nominal voltage, cable
    250 V (Peak value, not for high-power applications)
  • ECLASS 11.0
    27440102
  • ECLASS 5.1
    27143400
  • ETIM 4.0
    EC000830
  • UNSPSC 6.01
    31251501
  • Contact carrier material
    PA 6.6
  • Cable type
    INTERBUS
  • External sheath, color
    may green RAL 6017
  • Minimum bending radius, flexible installation
    15 x D
  • Acceleration
    3.2 m/s²
  • Cable capacity
    ≤ 60 nF/km (At 800 Hz)
  • Signal speed
    0.66 c
  • Coupling resistance
    < 250.00 mΩ/m (at 30 MHz)
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 6.0
    27279200
  • ECLASS 9.0
    27440102
  • UNSPSC 7.0901
    31251501
  • UNSPSC 12.01
    31251501
  • UNSPSC 13.2
    39121413
  • Number of positions
    5
  • Safety note
    WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
  • Conductor cross section
    3x 2x 0.22 mm²
  • Wire colors
    Green-yellow, white-brown, gray-pink
  • Traversing path
    10 m
  • Cable weight
    70 kg/km
  • Conductor material
    Bare Cu litz wires
  • Test voltage Core/Core
    1500 Vrms
  • ECLASS 10.0.1
    27440102
  • ECLASS 5.0
    27143400
  • ECLASS 7.0
    27440103
  • UNSPSC 19.0
    39121413
  • Bending radius
    120 mm
  • Material conductor insulation
    PE
  • Attenuation
    ≤ 15 dB/km (at 256 kHz)
  • Flame resistance
    according to VDE 0472, Part 4, test type B
  • ECLASS 4.0
    27140800
  • ETIM 6.0
    EC002061
  • UNSPSC 20.0
    39121413
  • UNSPSC 21.0
    39121413

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

1437630

Select Qty:

Average response time: 11 minutes

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo