Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

1437601 Phoenix Contact Electrical Connectors

Phoenix Contact 1437601 Bus system flush-type female connector, INTERBUS, 5-pos., M12, shielded, B-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 0.5 m bus line
Phoenix Contact

Part#:1437601

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Bus system flush-type female connector, INTERBUS, 5-pos., M12, shielded, B-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 0.5 m bus line

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 1437601 Phoenix Contact price in the box on the right side or send a quick quote.

1437601 Product Details

  • Degree of protection
    IP67 (When plugged in)
  • Coding
    B - inverse
  • Insertion/withdrawal cycles
    > 100
  • Rated current at 40°C
    4 A
  • Rated voltage
    48 V AC
  • Standards/regulations
    M12 connector IEC 61076-2-101
  • Contact surface material
    Ni/Au
  • Cable type (abbreviation)
    900
  • Conductor structure signal line
    32x 0.10 mm
  • Overall twist
    3 pairs to the core
  • Minimum bending radius, flexible installation
    15 x D
  • Acceleration
    3.2 m/s²
  • Cable capacity
    ≤ 60 nF/km (At 800 Hz)
  • Wave impedance
    120 Ω ±20 % (at 64 kHz)
  • ECLASS 11.0
    27440102
  • ECLASS 5.1
    27143400
  • UNSPSC 6.01
    31251501
  • UNSPSC 20.0
    39121413
  • Note
    The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
  • Insulation resistance
    ≥ 5 GΩ*km
  • Degree of pollution
    3
  • Torque
    2 Nm ... 3 Nm (Installation-side)
  • Material, knurls
    Nickel-plated brass
  • Cable type
    INTERBUS
  • External sheath, color
    may green RAL 6017
  • Number of bending cycles
    5000000
  • Outer sheath, material
    PUR
  • Material conductor insulation
    PE
  • Coupling resistance
    < 250.00 mΩ/m (at 30 MHz)
  • Shielded
    yes
  • ECLASS 5.0
    27143400
  • ETIM 6.0
    EC002061
  • ETIM 3.0
    EC002061
  • UNSPSC 12.01
    31251501
  • UNSPSC 19.0
    39121413
  • Length of cable
    0.5 m
  • Rated surge voltage
    1.5 kV
  • Signal type/category
    INTERBUS
  • Contact material
    CuZn
  • Sealing material
    FKM
  • Wire colors
    Green-yellow, white-brown, gray-pink
  • External cable diameter D
    8 mm
  • Bending radius
    120 mm
  • Traversing path
    10 m
  • Conductor material
    Bare Cu litz wires
  • Signal speed
    0.66 c
  • Test voltage Core/Shield
    1000 Vrms
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 6.0
    27279200
  • ETIM 4.0
    EC000830
  • UNSPSC 7.0901
    31251501
  • Ambient temperature (operation)
    -40 °C ... 80 °C (cable, fixed installation)
  • Number of positions
    5
  • Overvoltage category
    II
  • Flammability rating according to UL 94
    V0
  • Safety note
    WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
  • Conductor cross section
    3x 2x 0.22 mm²
  • Twisted pairs
    2 cores to the pair
  • Shielding
    Braided copper wires
  • Traversing rate
    1.6 m/s
  • Near end crosstalk attenuation (NEXT)
    ≥ 61 dB (at 772 kHz)
  • Test voltage Core/Core
    1500 Vrms
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 4.0
    27140800
  • ECLASS 7.0
    27440103
  • UNSPSC 11
    31251501
  • UNSPSC 18.0
    39121413
  • Standards/specifications
    M12 connector IEC 61076-2-101
  • Contact carrier material
    PA 6.6
  • Cable structure
    3 x 2 x 0.22 mm²
  • AWG signal line
    24
  • Minimum bending radius, fixed installation
    7.5 x D
  • Cable weight
    70 kg/km
  • Loop resistance
    ≤ 159.80 Ω/km
  • Attenuation
    ≤ 15 dB/km (at 256 kHz)
  • Flame resistance
    according to VDE 0472, Part 4, test type B
  • ECLASS 10.0.1
    27440102
  • ECLASS 4.1
    27140800
  • ECLASS 9.0
    27440102
  • UNSPSC 13.2
    39121413
  • UNSPSC 21.0
    39121413
  • Nominal voltage, cable
    250 V (Peak value, not for high-power applications)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo