1437559 Phoenix Contact Electrical Connectors

1437559 Product Details

• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Rated surge voltage
  1.5 kV
• Standards/regulations
  M12 connector IEC 61076-2-101
• Torque
  2 Nm ... 3 Nm (Installation-side)
• Material, knurls
  Zinc die-cast, nickel-plated
• Safety note
  WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• Length of cable
  5 m
• Rated voltage
  48 V AC
• Coding
  A - standard
• Degree of pollution
  3
• Flammability rating according to UL 94
  V0
• Sealing material
  FKM
• Cable type
  CANopen®/DeviceNet™, PUR, violet
• Type of pair shielding
  Plastic-coated aluminum foil, aluminum side outside
• External sheath, color
  violet RAL 4001
• Bending radius
  70 mm
• Acceleration
  3 m/s²
• Conductor material
  Tin-plated Cu litz wires
• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Insertion/withdrawal cycles
  > 100
Contact surface material
Ni/Au
Standards/specifications
M12 connector IEC 61076-2-101
Cable structure
2xAWG24/19+2xAWG22/19
Conductor structure signal line
19x 0.13 mm
Twisted pairs
2 cores to the pair
Optical shield covering
80 %
Minimum bending radius, flexible installation
10 x D
Traversing path
4.5 m
Outer sheath, material
PUR
Cable capacity
nom. 40 nF/km (Data cable)
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27143400
UNSPSC 6.01
31251501
UNSPSC 11
31251501
UNSPSC 21.0
39121413
Rated current at 40°C
4 A
ECLASS 6.0
27279200
ETIM 4.0
EC000830
UNSPSC 18.0
39121413
Degree of protection
IP67 (When plugged in)
Number of positions
5
Signal type/category
CANopen®
Contact carrier material
PA 6.6
Cable type (abbreviation)
920
AWG power supply
22
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
Shielding
Tinned copper braided shield
Minimum bending radius, fixed installation
5 x D
Cable weight
90 kg/km
Loop resistance
≤ 181.80 Ω/km (Data cable)
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
Halogen-free
in accordance with DIN VDE 0472 part 815
ECLASS 5.0
27143400
ECLASS 9.0
27440102
ECLASS 7.0
27440103
UNSPSC 12.01
31251501
Wire colors
Red-black, blue-white
External cable diameter D
6.7 mm ±0.3 mm
Material conductor insulation
Foamed PE (Data cable)
Wave impedance
120 Ω ±10 % (with 1 MHz)
Test voltage Core/Core
2000 V (50 Hz, 1 min.)
Other resistance
Low adhesion
ECLASS 11.0
27440102
ECLASS 4.0
27140800
ECLASS 4.1
27140800
ETIM 6.0
EC002061
UNSPSC 20.0
39121413
UNSPSC 13.2
39121413
ECLASS 10.0.1
27440102
ETIM 3.0
EC002061
UNSPSC 7.0901
31251501
UNSPSC 19.0
39121413
Connection method
CAN Bus / DeviceNet
Minimum bending radius, drag chain applications
10 x D
Shielded
yes
Overvoltage category
II
Contact material
CuZn
Overall twist
2 pairs around a drain wire in the center to the core
Flame resistance
UL 1581, Sec. 1060 (FT-1)
UL AWM style
21198 (80°C/300 V)
Number of bending cycles
5000000
Insulation resistance
≥ 5 GΩ*km (Data cable)
Conductor cross section
2x 0.25 mm² (Data cable)
Conductor structure, voltage supply
19x 0.15 mm
Traversing rate
3 m/s
Attenuation
≤ 22.9 dB/km (with 1 MHz)
AWG signal line
24
REACh SVHC
Lead 7439-92-1

Product condition