1437546 Phoenix Contact Electrical Connectors

1437546 Product Details

• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Rated surge voltage
  1.5 kV
• Degree of pollution
  3
• Contact material
  CuZn
• Standards/specifications
  M12 connector IEC 61076-2-101
• Cable type
  CANopen®/DeviceNet™, PUR, violet
• Conductor structure, voltage supply
  19x 0.15 mm
• Overall twist
  2 pairs around a drain wire in the center to the core
• Length of cable
  2 m
• Rated voltage
  48 V AC
• Standards/regulations
  M12 connector IEC 61076-2-101
• Flammability rating according to UL 94
  V0
• Contact carrier material
  PA 6.6
• UL AWM style
  21198 (80°C/300 V)
• Rated current at 40°C
  4 A
• Coding
  A - standard
• Signal type/category
  CANopen®
• Torque
  2 Nm ... 3 Nm (Installation-side)
• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Insulation resistance
  ≥ 5 GΩ*km (Data cable)
Degree of protection
IP67 (When plugged in)
Number of positions
5
Overvoltage category
II
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Cable structure
2xAWG24/19+2xAWG22/19
Optical shield covering
80 %
External cable diameter D
6.7 mm ±0.3 mm
Bending radius
70 mm
Acceleration
3 m/s²
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
Flame resistance
UL 1581, Sec. 1060 (FT-1)
ECLASS 10.0.1
27440102
ECLASS 11.0
27440102
ECLASS 6.0
27279200
ETIM 6.0
EC002061
Material, knurls
Zinc die-cast, nickel-plated
AWG power supply
22
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
Shielding
Tinned copper braided shield
Minimum bending radius, fixed installation
5 x D
Conductor material
Tin-plated Cu litz wires
Attenuation
≤ 22.9 dB/km (with 1 MHz)
Other resistance
Low adhesion
ECLASS 4.1
27140800
ETIM 4.0
EC000830
ECLASS 9.0
27440102
UNSPSC 20.0
39121413
Conductor structure signal line
19x 0.13 mm
Type of pair shielding
Plastic-coated aluminum foil, aluminum side outside
Number of bending cycles
5000000
Traversing rate
3 m/s
Material conductor insulation
Foamed PE (Data cable)
Wave impedance
120 Ω ±10 % (with 1 MHz)
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
Shielded
yes
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27143400
UNSPSC 6.01
31251501
UNSPSC 18.0
39121413
UNSPSC 21.0
39121413
Insertion/withdrawal cycles
> 100
Contact surface material
Ni/Au
Cable type (abbreviation)
920
Conductor cross section
2x 0.25 mm² (Data cable)
Twisted pairs
2 cores to the pair
External sheath, color
violet RAL 4001
Minimum bending radius, drag chain applications
10 x D
Traversing path
4.5 m
Loop resistance
≤ 181.80 Ω/km (Data cable)
Halogen-free
in accordance with DIN VDE 0472 part 815
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27143400
ECLASS 7.0
27440103
UNSPSC 11
31251501
UNSPSC 12.01
31251501
Connection method
CAN Bus / DeviceNet
Sealing material
FKM
AWG signal line
24
Wire colors
Red-black, blue-white
Minimum bending radius, flexible installation
10 x D
Cable weight
90 kg/km
Outer sheath, material
PUR
Cable capacity
nom. 40 nF/km (Data cable)
Test voltage Core/Core
2000 V (50 Hz, 1 min.)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
ECLASS 4.0
27140800
ETIM 3.0
EC002061
UNSPSC 7.0901
31251501
UNSPSC 19.0
39121413
UNSPSC 13.2
39121413

Product condition