1409681 Phoenix Contact Electrical Wires & Cables

1409681 Product Details

• Application
  For charging electric vehicles (EV) with alternating current (AC)
• Note on the connection method
  Crimp connection, cannot be disconnected
• Cable structure
  4 x 0.5 mm²
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Max. altitude
  5000 m (above sea level)
• Number of signal contacts
  2 (CP, PP)
• Rated voltage for signal contacts
  30 V AC
• Possible mounting positions
  Rear panel mounting
• Mounting hole diameter
  7.00 mm (ø)
• Locking type
  Locking in the inserted state with a locking mechanism
• Reverse current of the motor
  max. 0.5 A
• Cable length
  0.5 m
• China RoHS
  Environmentally Friendly Use Period = 10;
• ECLASS 5.1
  27143400
• ETIM 3.0
  EC002061
• UNSPSC 6.01
  30211923
• Affixed logo
  “PHOENIX CONTACT” logo
• Height
  96 mm
• Bore dimensions
  60 mm x 60 mm
• Conductor length
  0.5 m (AC cables)
Number of phases
3
Insertion/withdrawal cycles
> 10000
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Design line
Generation 1
Material surface of contacts
Ag
Max. dwell time with reverse current
1 s
Pause time after entry or exit path
3 s
Mechanical emergency release
available
ECLASS 5.0
27143400
ECLASS 9.0
27144706
UNSPSC 11
39121522
UNSPSC 21.0
39121522
Design
Generation 1
Charging mode
Mode 3, Case B
Width
75 mm
Maximum charging power
22 kW
Rated voltage for power contacts
480 V AC
Type of signal transmission
Pulse width modulation
Withdrawal force
< 100 N
Screw connection of a protective cover
Only rear mounting possible
Customer variations
On request
Possible power supply range at the motor
22 V ... 26 V
Service life insertion cycles
> 10000 load cycles
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27143400
ETIM 7.0
EC002898
UNSPSC 13.2
39121522
UNSPSC 19.0
39121522
Charging standard
Type 2
Ambient temperature (operation)
-30 °C ... 50 °C
Type of charging current
AC 3-phase
Number of power contacts
5 (L1, L2, L3, N, PE)
Insertion force
< 100 N
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Material
Plastic
Operating voltage
24 V (Typical power supply at the motor)
Recommended adaptation time
600 ms
Lock recognition
available
ECLASS 10.0.1
27144706
ECLASS 4.0
27140800
ECLASS 7.0
27449001
UNSPSC 7.0901
39121522
UNSPSC 18.0
39121522
Type
rear protective cover screw connection
Standards/regulations
IEC 62196-2
Depth
76.2 mm
Type of conductor
Single wires
Degree of protection
IP44 (plugged in)
Rated current of power contacts
32 A
Rated current for signal contacts
2 A
Mounting position of the locking actuator
Top center
Housing color
black
Maximum voltage for locking detection
30 V
Number of positions of theconnectors
4
Typical motor current for locking
0.05 A
ECLASS 11.0
27144706
ECLASS 4.1
27140800
ETIM 4.0
EC002061
ETIM 6.0
EC002898
UNSPSC 12.01
39121522
UNSPSC 20.0
39121522

Product condition