1409217 Phoenix Contact Electrical Connectors

1409217 Product Details

• Length
  107.5 mm
• Conductor cross section flexible max.
  6 mm²
• Stripping length of the individual wire
  12 mm (Lay PE conductor 8 mm leading)
• Contact surface material
  silver-plated
• Color of the housing part
  black
• Safety note
  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• ECLASS 4.1
  27260700
• ECLASS 9.0
  27440102
• ETIM 6.0
  EC002061
• Insertion/withdrawal cycles
  100
• Nominal voltage ATD
  690 V AC (in accordance with IEC 61984)
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  1.5 mm²
• ETIM 4.0
  EC002061
• Rated current
  35 A (With 6 mm² conductor cross section in accordance with IEC 61984)
• Torque
  max. 1 Nm (Contact screw)
• Conductor cross section solid max.
  6 mm²
• Degree of protection
  IP66 / IP68 (2m / 24h) / IP69K
• Cable gland material
  PPE
• Ambient temperature (storage/transport)
  -40 °C ... 70 °C
• China RoHS
  Environmentally Friendly Use Period = 50 years
UNSPSC 11
39121522
UNSPSC 20.0
39121413
Protection class
II
Pull-out-force
150 N ± 50 N
Contact carrier material
PPE
ECLASS 10.0.1
27440102
Stripping length
12 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible min.
4 mm²
Seal material
EPDM
Flammability rating according to UL 94
V0
ECLASS 11.0
27440102
ECLASS 5.0
27260700
UNSPSC 19.0
39121413
UNSPSC 21.0
39121413
Color
black
Width
37.6 mm
Overvoltage category
III
ECLASS 5.1
27260700
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Type
Can only be released with a tool
Connection method
Screw connection
Contact material
Cu
O-ring material
EPDM
Category of shock impact
IK08 (-25°C)
ECLASS 6.0
27260700
UNSPSC 7.0901
39121522
UNSPSC 12.01
39121522
UNSPSC 13.2
39121413
Locking type
Snap-in locking
Insertion force
30 N ±10 N
Rated voltage (III/2)
690 V
Stripping length of the sheath
50 mm
Conductor cross section solid min.
1.5 mm²
Insulating material group
I / CTI 600
Housing material
PPE
Ambient temperature (operation)
-40 °C ... 105 °C (dependent on the derating curve)
Halogen-free
yes
ECLASS 4.0
27260700
ECLASS 7.0
27440102
UNSPSC 6.01
30211923
Number of positions
3
Degree of protection (when plugged in)
IP66 / IP68 (2m / 24h) / IP69K (IP69K measured at Phoenix Contact approval laboratory)
Height
37.6 mm
Type of contact
Socket
UNSPSC 18.0
39121413

Product condition