1405866 Phoenix Contact Data & Networking Devices

1405866 Product Details

• Degree of protection
  IP67 (When plugged in)
• Signal type/category
  Ethernet CAT5 (IEC 11801), 100 Mbps
• Cable type (abbreviation)
  93E
• Twisted pairs
  2 cores to the pair
• External sheath, color
  water blue RAL 5021
• Conductor material
  Bare Cu litz wires
• Alternative short product description
  Ethernet cable
• Contact surface material
  Ni/Au
• Rated current at 40°C
  4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
• Degree of pollution
  3
• Transmission characteristics (category)
  CAT5
• UL AWM style
  20963 (80°C/30 V)
• Core diameter including insulation
  0.98 mm
• Shielding
  Aluminum-coated foil, tinned copper braided shield
• Tensile strength GRP
  ≤ 80 N
• Insulation resistance
  ≥ 500 MΩ*km
• Cable type
  Ethernet flexible CAT5, 2-pair
• AWG signal line
  26
• Overall twist
  Two pairs with two fillers to the core
• Outer sheath thickness
  1.2 mm
Number of positions
4
Standards/regulations
M12 connector IEC 61076-2-101
Transmission speed
100 Mbps
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Cable weight
42 kg/km
Material conductor insulation
Foamed PE
Conductor structure signal line
7x 0.16 mm
Wire colors
white/orange-orange, white/green-green
External cable diameter D
6.4 mm ±0.2 mm
Outer sheath, material
PUR
Insertion/withdrawal cycles
≥ 100
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Standards/specifications
Electrical requirements EN 50288-2-2
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Overvoltage category
II
Contact material
CuZn
Conductor cross section
2x 2x 0.14 mm²
Optical shield covering
70 %
Minimum bending radius, flexible installation
8 x D
Wave impedance
100 Ω ±5 Ω (at 100 MHz)
Attenuation
3.2 dB (with 1 MHz)
Length of cable
2 m
Rated voltage
48 V AC
Rated surge voltage
2.5 kV
Contact carrier material
PA 6.6
Flammability rating according to UL 94
V0
Cable structure
2x2xAWG26/7; SF/UTP
ECLASS 11.0
27060308
ECLASS 9.0
27060308
ETIM 7.0
EC001262
UNSPSC 12.01
31261501
UNSPSC 20.0
26121604
ETIM 4.0
EC001262
UNSPSC 21.0
26121604
ECLASS 4.1
24010400
Ambient temperature (storage/transport)
-20 °C ... 80 °C
China RoHS
Environmentally Friendly Use Period = 50 years
Minimum bending radius, fixed installation
4 x D
Cable capacity
approx. 45 nF/km (at 1 kHz)
Nominal voltage, cable
≤ 100 V (Peak value, not for high-power applications)
ETIM 6.0
EC001262
UNSPSC 19.0
26121604
Coupling resistance
≤ 100.00 mΩ/m (at 10 MHz)
Near end crosstalk attenuation (NEXT)
65.3 dB (with 1 MHz)
ECLASS 10.0.1
27060308
ECLASS 5.0
19030300
UNSPSC 6.01
26121616
Loop resistance
≤ 290.00 Ω/km
Return loss (RL)
23 dB (at 4 МHz)
Test voltage Core/Shield
700 V (50 Hz, 1 min.)
ECLASS 5.1
19030300
UNSPSC 11
26121604
Signal runtime
5.3 ns/m
Resistance to oil
according to EN 60811-2-1
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
24010400
ECLASS 7.0
27060308
Power-summated near end crosstalk attenuation (PSNEXT)
62.3 dB (with 1 MHz)
Test voltage Core/Core
700 V (50 Hz, 1 min.)
Shielded
yes
ECLASS 6.0
27061800
ETIM 3.0
EC001262
UNSPSC 13.2
26121604
Current carrying capacity of cable
2 A (according to DIN VDE 0891-1)
Halogen-free
according to IEC 60754-1
Flame resistance
according to IEC 60332-1-2
Ambient temperature (installation)
-20 °C ... 80 °C
UNSPSC 7.0901
26121616
UNSPSC 18.0
26121604

Product condition