1405837 Phoenix Contact Data & Networking Devices

1405837 Product Details

• Degree of protection
  IP65
• Rated voltage
  48 V AC
• Alternative short product description
  Ethernet cable
• Overvoltage category
  II
• Flammability rating according to UL 94
  V0
• Safety note
  WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• Core diameter including insulation
  0.98 mm
• Conductor structure signal line
  7x 0.16 mm
• Rated current at 40°C
  4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
• Standards/regulations
  M12 connector IEC 61076-2-101
• Rated surge voltage
  2.5 kV
• Contact carrier material
  PA 6.6
• Transmission speed
  100 Mbps
• Cable type
  Ethernet flexible CAT5, 2-pair
• AWG signal line
  26
• Twisted pairs
  2 cores to the pair
• Outer sheath thickness
  1.2 mm
• Minimum bending radius, flexible installation
  8 x D
• Loop resistance
  ≤ 290.00 Ω/km
• Near end crosstalk attenuation (NEXT)
  65.3 dB (with 1 MHz)
Signal runtime
5.3 ns/m
ETIM 4.0
EC001262
UNSPSC 20.0
26121604
Length of cable
2 m
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Number of positions
4
Degree of pollution
3
Contact material
CuZn
Transmission characteristics (category)
CAT5
UL AWM style
20963 (80°C/30 V)
Overall twist
Two pairs with two fillers to the core
Minimum bending radius, fixed installation
4 x D
Outer sheath, material
PUR
Attenuation
3.2 dB (with 1 MHz)
Return loss (RL)
23 dB (at 4 МHz)
Test voltage Core/Shield
700 V (50 Hz, 1 min.)
Ambient temperature (storage/transport)
-20 °C ... 80 °C
Ambient temperature (installation)
-20 °C ... 80 °C
UNSPSC 21.0
26121604
Wave impedance
100 Ω ±5 Ω (at 100 MHz)
Halogen-free
according to IEC 60754-1
Test voltage Core/Core
700 V (50 Hz, 1 min.)
Cable structure
2x2xAWG26/7; SF/UTP
Shielding
Aluminum-coated foil, tinned copper braided shield
Cable weight
42 kg/km
Flame resistance
according to IEC 60332-1-2
Optical shield covering
70 %
External sheath, color
water blue RAL 5021
REACh SVHC
Lead 7439-92-1
Material conductor insulation
Foamed PE
Signal type/category
Ethernet CAT5 (IEC 11801), 100 Mbps
Contact surface material
Ni/Au
Conductor cross section
2x 2x 0.14 mm²
Cable type (abbreviation)
93E
Wire colors
white/orange-orange, white/green-green
Conductor material
Bare Cu litz wires
Coupling resistance
≤ 100.00 mΩ/m (at 10 MHz)
Tensile strength GRP
≤ 80 N
Insulation resistance
≥ 500 MΩ*km
Power-summated near end crosstalk attenuation (PSNEXT)
62.3 dB (with 1 MHz)
UNSPSC 18.0
26121604
External cable diameter D
6.4 mm ±0.2 mm
Current carrying capacity of cable
2 A (according to DIN VDE 0891-1)
Standards/specifications
Electrical requirements EN 50288-2-2
ECLASS 11.0
27060308
ECLASS 5.1
19030300
UNSPSC 7.0901
26121616
ETIM 7.0
EC001262
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Nominal voltage, cable
≤ 100 V (Peak value, not for high-power applications)
ECLASS 5.0
19030300
ETIM 3.0
EC001262
UNSPSC 12.01
31261501
ETIM 6.0
EC001262
Resistance to oil
according to EN 60811-2-1
ECLASS 4.1
24010400
ECLASS 9.0
27060308
UNSPSC 13.2
26121604
Shielded
yes
Insertion/withdrawal cycles
≥ 100
UNSPSC 19.0
26121604
Cable capacity
approx. 45 nF/km (at 1 kHz)
China RoHS
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
ECLASS 10.0.1
27060308
ECLASS 6.0
27061800
ECLASS 7.0
27060308
UNSPSC 6.01
26121616
UNSPSC 11
26121604
ECLASS 4.0
24010400

Product condition