1405215 Phoenix Contact Electrical Wires & Cables

1405215 Product Details

• Application
  For charging electric vehicles (EV) with alternating current (AC)
• Charging mode
  Mode 3, Case B
• Depth
  76.2 mm
• Cable structure
  4 x 0.5 mm²
• Number of signal contacts
  2 (CP, PP)
• Insertion force
  < 100 N
• Type of signal transmission
  Pulse width modulation
• Design line
  Generation 1
• Operating voltage
  24 V (Typical power supply at the motor)
• Typical motor current for locking
  0.05 A
• Type
  rear protective cover screw connection
• Charging standard
  Type 2
• Conductor length
  0.7 m (AC cables)
• Type of conductor
  Single wires
• Max. altitude
  5000 m (above sea level)
• Rated current for signal contacts
  2 A
• Insertion/withdrawal cycles
  > 10000
• Withdrawal force
  < 100 N
• Screw connection of a protective cover
  Only rear mounting possible
• Housing color
  black
Material surface of contacts
Ag
Number of positions of theconnectors
4
Possible power supply range at the motor
22 V ... 26 V
Service life insertion cycles
> 10000 load cycles
ECLASS 11.0
27144706
ECLASS 4.1
27140800
ECLASS 7.0
27449001
UNSPSC 6.01
30211923
Standards/regulations
IEC 62196-2
Height
96 mm
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Type of charging current
AC 3-phase
Number of phases
3
Rated voltage for signal contacts
30 V AC
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Customer variations
On request
Locking type
Locking in the inserted state with a locking mechanism
Maximum voltage for locking detection
30 V
Reverse current of the motor
max. 0.5 A
Pause time after entry or exit path
3 s
Mechanical emergency release
available
ECLASS 4.0
27140800
ECLASS 9.0
27144706
ETIM 6.0
EC002898
UNSPSC 7.0901
39121522
Design
Generation 1
Width
75 mm
Ambient temperature (operation)
-30 °C ... 50 °C
Degree of protection
IP44 (plugged in)
Number of power contacts
5 (L1, L2, L3, N, PE)
UNSPSC 11
39121522
UNSPSC 13.2
39121522
Affixed logo
“PHOENIX CONTACT” logo
Note on the connection method
Crimp connection, cannot be disconnected
Bore dimensions
60 mm x 60 mm
Maximum charging power
13.8 kW
Rated current of power contacts
20 A
Rated voltage for power contacts
480 V AC
Possible mounting positions
Rear panel mounting
Mounting position of the locking actuator
Top center
Mounting hole diameter
7.00 mm (ø)
Material
Plastic
Recommended adaptation time
600 ms
Cable length
0.5 m
Lock recognition
available
ECLASS 5.0
27143400
ECLASS 5.1
27143400
ETIM 4.0
EC002061
UNSPSC 19.0
39121522
UNSPSC 21.0
39121522
Max. dwell time with reverse current
1 s
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 10.0.1
27144706
ECLASS 6.0
27143400
ETIM 3.0
EC002061
ETIM 7.0
EC002898
UNSPSC 12.01
39121522
UNSPSC 20.0
39121522
UNSPSC 18.0
39121522

Product condition