1405214 Phoenix Contact Electrical Wires & Cables

1405214 Product Details

• Design
  Generation 1
• Height
  96 mm
• Conductor length
  0.7 m (AC cables)
• Degree of protection
  IP44 (plugged in)
• Type of charging current
  AC 3-phase
• Rated current for signal contacts
  2 A
• Rated voltage for signal contacts
  30 V AC
• Housing color
  black
• Locking type
  Locking in the inserted state with a locking mechanism
• Recommended adaptation time
  600 ms
• Max. dwell time with reverse current
  1000 ms
• Mechanical emergency release
  available
• ECLASS 10.0.1
  27144706
• ECLASS 6.0
  27143400
• ETIM 6.0
  EC002898
• UNSPSC 18.0
  39121522
• Application
  For charging electric vehicles (EV) with alternating current (AC)
• Charging standard
  Type 2
• Charging mode
  Mode 3, Case B
• Max. altitude
  5000 m (above sea level)
Number of power contacts
5 (L1, L2, L3, N, PE)
Type of signal transmission
Pulse width modulation
Withdrawal force
< 100 N
Mounting position of the locking actuator
Top center
Customer variations
On request
Number of positions of theconnectors
4
Maximum voltage for locking detection
30 V
ECLASS 11.0
27144706
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27143400
UNSPSC 7.0901
39121522
UNSPSC 11
39121522
UNSPSC 21.0
39121522
Standards/regulations
IEC 62196-2
Cable structure
4 x 0.5 mm²
Type of conductor
Single wires
Number of signal contacts
2 (CP, PP)
Insertion/withdrawal cycles
> 10000
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Design line
Generation 1
Material
Plastic
Reverse current of the motor
max. 1 A
Service life insertion cycles
> 10000 load cycles
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 4.0
27140800
ECLASS 4.1
27140800
ETIM 4.0
EC002061
UNSPSC 6.01
30211923
UNSPSC 20.0
39121522
Type
rear protective cover screw connection
Depth
76.2 mm
Width
75 mm
Maximum charging power
22 kW
Rated current of power contacts
32 A
Number of phases
3
Insertion force
< 100 N
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Mounting hole diameter
7.00 mm (ø)
Possible power supply range at the motor
9 V ... 16 V
Pause time after entry or exit path
3 s
Lock recognition
available
ECLASS 5.0
27143400
ECLASS 9.0
27144706
ETIM 7.0
EC002898
UNSPSC 13.2
39121522
Affixed logo
“PHOENIX CONTACT” logo
Note on the connection method
Crimp connection, cannot be disconnected
Bore dimensions
60 mm x 60 mm
Ambient temperature (operation)
-30 °C ... 50 °C
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Rated voltage for power contacts
480 V AC
Possible mounting positions
Rear panel mounting
Screw connection of a protective cover
Only rear mounting possible
Material surface of contacts
Ag
Operating voltage
12 V (Typical power supply at the motor)
Typical motor current for locking
0.2 A
Cable length
0.5 m
ECLASS 7.0
27449001
ETIM 3.0
EC002061
UNSPSC 12.01
39121522
UNSPSC 19.0
39121522

Product condition