1405213 Phoenix Contact Electrical Wires & Cables

1405213 Product Details

• Note on the connection method
  Crimp connection, cannot be disconnected
• Conductor length
  0.7 m (AC cables)
• Type of conductor
  Single wires
• Degree of protection
  IP44 (plugged in)
• Rated voltage for power contacts
  480 V AC
• Rated voltage for signal contacts
  30 V AC
• Mounting position of the locking actuator
  Top center
• Mounting hole diameter
  7.00 mm (ø)
• Possible power supply range at the motor
  9 V ... 16 V
• Pause time after entry or exit path
  3 s
• China RoHS
  Environmentally Friendly Use Period = 10;
• ECLASS 7.0
  27449001
• ETIM 3.0
  EC002061
• UNSPSC 13.2
  39121522
• UNSPSC 20.0
  39121522
• Affixed logo
  “PHOENIX CONTACT” logo
• Charging standard
  Type 2
• Depth
  76.2 mm
• Max. altitude
  5000 m (above sea level)
• Number of power contacts
  5 (L1, L2, L3, N, PE)
Type of signal transmission
Pulse width modulation
Insertion force
< 100 N
Screw connection of a protective cover
Only rear mounting possible
Material
Plastic
Locking type
Locking in the inserted state with a locking mechanism
Recommended adaptation time
600 ms
Lock recognition
available
ECLASS 4.1
27140800
ECLASS 9.0
27144706
UNSPSC 11
39121522
UNSPSC 21.0
39121522
Design
Generation 1
Charging mode
Mode 3, Case B
Ambient temperature (operation)
-30 °C ... 50 °C
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Number of phases
3
Rated current for signal contacts
2 A
Possible mounting positions
Rear panel mounting
Design line
Generation 1
Number of positions of theconnectors
4
Maximum voltage for locking detection
30 V
Cable length
0.5 m
ECLASS 11.0
27144706
ECLASS 6.0
27143400
ETIM 4.0
EC002061
ETIM 7.0
EC002898
UNSPSC 12.01
39121522
Type
rear protective cover screw connection
Standards/regulations
IEC 62196-2
Height
96 mm
Bore dimensions
60 mm x 60 mm
Maximum charging power
13.8 kW
Rated current of power contacts
20 A
Withdrawal force
< 100 N
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Housing color
black
Material surface of contacts
Ag
Max. dwell time with reverse current
1000 ms
Mechanical emergency release
available
ECLASS 10.0.1
27144706
ETIM 6.0
EC002898
UNSPSC 6.01
30211923
Application
For charging electric vehicles (EV) with alternating current (AC)
Width
75 mm
Cable structure
4 x 0.5 mm²
Type of charging current
AC 3-phase
Number of signal contacts
2 (CP, PP)
Insertion/withdrawal cycles
> 10000
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Customer variations
On request
Operating voltage
12 V (Typical power supply at the motor)
Reverse current of the motor
max. 1 A
Typical motor current for locking
0.2 A
Service life insertion cycles
> 10000 load cycles
ECLASS 4.0
27140800
ECLASS 5.0
27143400
ECLASS 5.1
27143400
UNSPSC 7.0901
39121522
UNSPSC 18.0
39121522
UNSPSC 19.0
39121522

Product condition