1404245 Phoenix Contact Data & Networking Devices

1404245 Product Details

• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Length of cable
  5 m
• Rated voltage
  48 V AC
• Degree of pollution
  3
• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Overvoltage category
  II
• Contact material
  CuZn
• Transmission characteristics (category)
  CAT5
• External sheath, color
  water blue RAL 5021
• Minimum bending radius, flexible installation
  8 x D
• Cable capacity
  approx. 45 nF/km (at 1 kHz)
• Cable type
  Ethernet flexible CAT5, 2-pair
• Conductor structure signal line
  7x 0.16 mm
• Optical shield covering
  70 %
• Minimum bending radius, fixed installation
  4 x D
• Outer sheath, material
  PUR
• Signal runtime
  5.3 ns/m
• Degree of protection
  IP67
• Number of positions
  4
• Contact surface material
  Ni/Au
AWG signal line
26
Loop resistance
≤ 290.00 Ω/km
Current carrying capacity of cable
2 A (according to DIN VDE 0891-1)
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
External cable diameter D
6.4 mm ±0.2 mm
Insulation resistance
≥ 500 MΩ*km
Near end crosstalk attenuation (NEXT)
65.3 dB (with 1 MHz)
Test voltage Core/Shield
700 V (50 Hz, 1 min.)
Ambient temperature (storage/transport)
-20 °C ... 80 °C
China RoHS
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
ECLASS 5.0
19030300
UNSPSC 21.0
26121604
Standards/regulations
M12 connector IEC 61076-2-101
Alternative short product description
Ethernet cable
Overall twist
Two pairs with two fillers to the core
Tensile strength GRP
≤ 80 N
ECLASS 6.0
27061800
Transmission speed
100 Mbps
Cable type (abbreviation)
93E
UL AWM style
20963 (80°C/30 V)
Insertion/withdrawal cycles
≥ 100
Wire colors
white/orange-orange, white/green-green
Cable weight
42 kg/km
Attenuation
3.2 dB (with 1 MHz)
Nominal voltage, cable
≤ 100 V (Peak value, not for high-power applications)
ECLASS 10.0.1
27061801
ECLASS 4.0
24010400
ETIM 3.0
EC001262
ETIM 6.0
EC000830
UNSPSC 12.01
31261501
Signal type/category
Ethernet CAT5 (IEC 11801), 100 Mbps
Flammability rating according to UL 94
V0
Conductor material
Bare Cu litz wires
Coupling resistance
≤ 100.00 mΩ/m (at 10 MHz)
Conductor cross section
2x 2x 0.14 mm²
Core diameter including insulation
0.98 mm
Shielded
yes
Outer sheath thickness
1.2 mm
Material conductor insulation
Foamed PE
Power-summated near end crosstalk attenuation (PSNEXT)
62.3 dB (with 1 MHz)
ECLASS 4.1
24010400
ECLASS 9.0
27061801
ETIM 7.0
EC003249
UNSPSC 6.01
26121616
UNSPSC 20.0
26121604
Contact carrier material
PA 6.6
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Test voltage Core/Core
700 V (50 Hz, 1 min.)
Ambient temperature (installation)
-20 °C ... 80 °C
REACh SVHC
Lead 7439-92-1
UNSPSC 18.0
26121604
Cable structure
2x2xAWG26/7; SF/UTP
ECLASS 11.0
27061801
Wave impedance
100 Ω ±5 Ω (at 100 MHz)
Return loss (RL)
23 dB (at 4 МHz)
ECLASS 5.1
19030300
ETIM 4.0
EC000830
UNSPSC 19.0
26121604
Flame resistance
according to IEC 60332-1-2
Halogen-free
according to IEC 60754-1
UNSPSC 7.0901
26121616
UNSPSC 13.2
26121604
Resistance to oil
according to EN 60811-2-1
ECLASS 7.0
27061801
Standards/specifications
Electrical requirements EN 50288-2-2
UNSPSC 11
26121604
Twisted pairs
2 cores to the pair
Shielding
Aluminum-coated foil, tinned copper braided shield

Product condition