Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

1270310 Phoenix Contact Electrical Wires & Cables

Phoenix Contact 1270310 CHARX connect, Vehicle charging inlet, Locking actuator right, For charging with alternating current (AC) and with direct current (DC), For installation in electric vehicles (EV), CCS type 2, Combined Charging System, IEC 62196-2, IEC 62196-3, 125 A / 100
Phoenix Contact

Part#:1270310

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: CHARX connect, Vehicle charging inlet, Locking actuator right, For charging with alternating current (AC) and with direct current (DC), For installation in electric vehicles (EV), CCS type 2, Combined Charging System, IEC 62196-2, IEC 62196-3, 125 A / 100

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 1270310 Phoenix Contact price in the box on the right side or send a quick quote.

1270310 Product Details

  • Charging mode
    Mode 2, 3, 4
  • Ambient temperature (operation)
    -40 °C ... 80 °C
  • Number of power contacts
    7 (L1, L2, L3, N, PE, DC+, DC-)
  • Rated voltage for power contacts
    480 V AC
  • Temperature monitoring
    AC contacts: PTC system (DIN EN 60738-1)
  • Mounting hole diameter
    6.80 mm (ø)
  • Application
    For charging with alternating current (AC) and with direct current (DC)
  • Note
    A protective cap is supplied as standard for the DC and AC contacts.
  • Bore dimensions
    117.65 mm x 90 mm, 117.65 mm x 83 mm
  • Type of charging current
    DC, AC 3-phase
  • Rated current for signal contacts
    2 A
  • Number of signal contacts
    2 (CP, PP)
  • Resistor coding
    4.7 kΩ (between PE and PP)
  • Restrictions to mounting position
    Only 0 to 90 degree frontal inclination possible, see figure
  • Housing color
    black
  • Material surface of contacts
    Ag
  • Cable resistance
    ≤ 37.1 Ω/km
  • Cable weight
    7 kg/km
  • Maximum voltage for locking detection
    12 V
  • Service life insertion cycles
    > 10000 load cycles
  • Tolerance at the sensor with the recommended measured current
    ±5K
  • ECLASS 9.0
    27144706
  • Standards/regulations
    DIN EN 60751
  • Height
    140.25 mm
  • Conductor length
    2 m (AC cables)
  • Maximum charging power
    125 kW
  • Rated current of power contacts
    32 A AC
  • Type of signal transmission
    Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
  • Insertion/withdrawal cycles
    > 10000
  • Mounting position of the locking actuator
    Right-side
  • Design line
    Generation 4
  • External cable diameter
    1.6 mm -0.2 mm
  • Number of positions of theconnectors
    4
  • Typical motor current for locking
    0.25 A
  • Pause time after entry or exit path
    3 s
  • Lock recognition
    available
  • ECLASS 11.0
    27144706
  • Type
    Locking actuator right
  • Design
    Generation 4
  • Note on the connection method
    Crimp connection, cannot be disconnected
  • Max. altitude
    4000 m (above sea level)
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Number of phases
    3
  • Insulation resistance of neighboring contacts
    > 200 MΩ
  • Insertion force
    < 100 N
  • Screws included in the scope of delivery
    none
  • Material
    Plastic
  • Locking type
    Locking in the inserted state with a locking mechanism
  • Outer sheath, material
    PVC
  • Operating voltage
    12 V (Typical power supply at the motor)
  • Max. dwell time with reverse current
    1 s
  • Mechanical emergency release
    available
  • Temperature range
    -40 °C ... 130 °C
  • Charging standard
    CCS type 2
  • Depth
    128.4 mm
  • Width
    108 mm
  • Degree of protection
    IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
  • Rated voltage for signal contacts
    30 V AC
  • Temperature measurement
    DC contacts: Pt 1000 (DIN EN 60751)
  • Withdrawal force
    < 100 N
  • Flammability rating
    V0
  • Cable structure
    4 x 0.5 mm²
  • External sheath, color
    Green-yellow
  • Single wire, color
    black PP/CS
  • Reverse current of the motor
    max. 1.5 A
  • Recommended adaptation time
    600 ms
  • Type of sensor
    Pt 1000
  • ECLASS 10.0.1
    27144706
  • Required mounting screws
    M6
  • Customer variations
    On request
  • Minimum bending radius
    15 mm
  • Possible power supply range at the motor
    9 V ... 16 V
  • Cable length
    1 m
  • Recommended measured current
    ≤ 1 mA (Umax= 16 V DC)
  • Resistance range
    650 Ω ... 1450 Ω

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo