1270301 Phoenix Contact Electrical Wires & Cables
Part#:1270301
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: CHARX connect, Vehicle charging inlet, Locking actuator right, For charging with alternating current (AC) and with direct current (DC), For installation in electric vehicles (EV), CCS type 2, Combined Charging System, IEC 62196-3, 250 A / 1000 V (DC), 32
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 1270301 Phoenix Contact price in the box on the right side or send a quick quote.
1270301 Product Details
- Application For charging with alternating current (AC) and with direct current (DC)
- Charging mode Mode 2, 3, 4
- Depth 128.4 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Rated current for signal contacts 2 A
- Type of signal transmission Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
- Insertion/withdrawal cycles > 10000
- Restrictions to mounting position Only 0 to 90 degree frontal inclination possible, see figure
- Material Plastic
- External cable diameter 1.6 mm -0.2 mm
- External sheath, color Green-yellow
- Outer sheath, material PVC
- Number of positions of theconnectors 4
- Maximum voltage for locking detection 30 V
- Service life insertion cycles > 10000 load cycles
- Lock recognition available
- Standards/regulations DIN EN 60751
- Note on the connection method Crimp connection, cannot be disconnected
- Degree of protection IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
- Max. altitude 4000 m (above sea level)
- Number of signal contacts 2 (CP, PP)
- Resistor coding 4.7 kΩ (between PE and PP)
- Mounting hole diameter 6.80 mm (ø)
- Screws included in the scope of delivery none
- Cable structure 4 x 0.5 mm²
- Height 130.4 mm
- Bore dimensions 117.65 mm x 90 mm, 117.65 mm x 83 mm
- Maximum charging power 250 kW
- Rated voltage for power contacts 480 V AC
- Rated voltage for signal contacts 30 V AC
- Temperature measurement DC contacts: 2x PT1000 (DIN EN 60751)
- Temperature monitoring AC contacts: PTC chain (DIN˽EN˽60738-1)
- Required mounting screws M6
- Housing color black
- Cable resistance ≤ 37.1 Ω/km
- Possible power supply range at the motor 22 V ... 26 V
- Pause time after entry or exit path 3 s
- Tolerance at the sensor with the recommended measured current ±5K
- ECLASS 9.0 27144706
- Design Generation 4
- Note A protective cap is supplied as standard for the DC and AC contacts.
- Conductor length 2 m (AC cables)
- Type of charging current DC, AC 3-phase
- Number of phases 3
- Number of power contacts 7 (L1, L2, L3, N, PE, DC+, DC-)
- Insertion force < 100 N
- Mounting position of the locking actuator Right-side
- Locking type Locking in the inserted state with a locking mechanism
- Material surface of contacts Ag
- Minimum bending radius 15 mm
- Reverse current of the motor max. 0.5 A
- Typical motor current for locking 0.05 A
- Type of sensor Pt 1000
- ECLASS 11.0 27144706
- Cable weight 7 kg/km
- Customer variations On request
- Flammability rating V0
- Type Locking actuator right
- Charging standard CCS type 2
- Width 108 mm
- Ambient temperature (operation) -30 °C ... 50 °C
- Rated current of power contacts 32 A AC
- Insulation resistance of neighboring contacts > 200 MΩ
- Withdrawal force < 100 N
- Design line Generation 4
- Single wire, color black PP/CS
- Operating voltage 24 V (Typical power supply at the motor)
- Max. dwell time with reverse current 1 s
- Cable length 0.5 m
- Mechanical emergency release available
- Resistance range 650 Ω ... 1450 Ω
- Recommended adaptation time 600 ms
- Recommended measured current ≤ 1 mA (Umax= 16 V DC)
- Temperature range -40 °C ... 130 °C
- ECLASS 10.0.1 27144706
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨