Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

1211210 Phoenix Contact Electrical Wires & Cables

Phoenix Contact 1211210 CHARX connect, Vehicle charging inlet, Locking actuator right, For charging with alternating current (AC) and with direct current (DC), For installation in electric vehicles (EV), CCS type 2, Combined Charging System, IEC 62196-2, IEC 62196-3, 125 A / 100
Phoenix Contact

Part#:1211210

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: CHARX connect, Vehicle charging inlet, Locking actuator right, For charging with alternating current (AC) and with direct current (DC), For installation in electric vehicles (EV), CCS type 2, Combined Charging System, IEC 62196-2, IEC 62196-3, 125 A / 100

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 1211210 Phoenix Contact price in the box on the right side or send a quick quote.

1211210 Product Details

  • Design
    Generation 4
  • Charging standard
    CCS type 2
  • Note
    A protective cap is supplied as standard for the DC and AC contacts.
  • Conductor length
    2 m (AC cables)
  • Number of power contacts
    7 (L1, L2, L3, N, PE, DC+, DC-)
  • Rated current for signal contacts
    2 A
  • Type
    Locking actuator right
  • Charging mode
    Mode 2, 3, 4
  • Depth
    128.4 mm
  • Ambient temperature (operation)
    -30 °C ... 50 °C
  • Number of phases
    3
  • Rated voltage for power contacts
    480 V AC
  • Resistor coding
    4.7 kΩ (between PE and PP)
  • Withdrawal force
    < 100 N
  • Mounting position of the locking actuator
    Right-side
  • Mounting hole diameter
    6.80 mm (ø)
  • Flammability rating
    V0
  • Material surface of contacts
    Ag
  • External sheath, color
    Green-yellow
  • Single wire, color
    black PP/CS
  • Reverse current of the motor
    max. 0.5 A
  • Lock recognition
    available
  • ECLASS 10.0.1
    27144706
  • ECLASS 9.0
    27144706
  • Application
    For charging with alternating current (AC) and with direct current (DC)
  • Note on the connection method
    Crimp connection, cannot be disconnected
  • Bore dimensions
    117.65 mm x 90 mm, 117.65 mm x 83 mm
  • Max. altitude
    4000 m (above sea level)
  • Type of charging current
    DC, AC 3-phase
  • Type of signal transmission
    Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
  • Insertion force
    < 100 N
  • Required mounting screws
    M6
  • Housing color
    black
  • Cable resistance
    ≤ 37.1 Ω/km
  • Minimum bending radius
    15 mm
  • Operating voltage
    24 V (Typical power supply at the motor)
  • Max. dwell time with reverse current
    1 s
  • Type of sensor
    Pt 1000
  • Resistance range
    650 Ω ... 1450 Ω
  • Standards/regulations
    DIN EN 60751
  • Width
    108 mm
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Maximum charging power
    125 kW
  • Number of signal contacts
    2 (CP, PP)
  • Temperature measurement
    DC contacts: 2x PT1000 (DIN EN 60751)
  • Restrictions to mounting position
    Only 0 to 90 degree frontal inclination possible, see figure
  • Design line
    Generation 4
  • Customer variations
    On request
  • Cable structure
    4 x 0.5 mm²
  • Outer sheath, material
    PVC
  • Maximum voltage for locking detection
    30 V
  • Service life insertion cycles
    > 10000 load cycles
  • Mechanical emergency release
    available
  • Temperature range
    -40 °C ... 130 °C
  • ECLASS 11.0
    27144706
  • Height
    130.4 mm
  • Degree of protection
    IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
  • Rated current of power contacts
    32 A AC
  • Rated voltage for signal contacts
    30 V AC
  • Insulation resistance of neighboring contacts
    > 200 MΩ
  • Screws included in the scope of delivery
    none
  • Locking type
    Locking in the inserted state with a locking mechanism
  • Cable weight
    7 kg/km
  • Number of positions of theconnectors
    4
  • Cable length
    0.5 m
  • Tolerance at the sensor with the recommended measured current
    ±5K
  • Temperature monitoring
    AC contacts: PTC chain (DIN˽EN˽60738-1)
  • Insertion/withdrawal cycles
    > 10000
  • Material
    Plastic
  • External cable diameter
    1.6 mm -0.2 mm
  • Possible power supply range at the motor
    22 V ... 26 V
  • Recommended adaptation time
    600 ms
  • Typical motor current for locking
    0.05 A
  • Pause time after entry or exit path
    3 s
  • Recommended measured current
    ≤ 1 mA (Umax= 16 V DC)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo