Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

1211206 Phoenix Contact Electrical Wires & Cables

Phoenix Contact 1211206 CHARX connect, Vehicle charging inlet, Locking actuator right, For charging with alternating current (AC) and with direct current (DC), For installation in electric vehicles (EV), CCS type 2, Combined Charging System, IEC 62196-2, IEC 62196-3, 250 A / 100
Phoenix Contact

Part#:1211206

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: CHARX connect, Vehicle charging inlet, Locking actuator right, For charging with alternating current (AC) and with direct current (DC), For installation in electric vehicles (EV), CCS type 2, Combined Charging System, IEC 62196-2, IEC 62196-3, 250 A / 100

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 1211206 Phoenix Contact price in the box on the right side or send a quick quote.

1211206 Product Details

  • Design
    Generation 4
  • Charging mode
    Mode 2, 3, 4
  • Width
    108 mm
  • Max. altitude
    4000 m (above sea level)
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Number of phases
    1
  • Number of power contacts
    5 (L1, N, PE, DC+, DC-)
  • Insulation resistance of neighboring contacts
    > 200 MΩ
  • Withdrawal force
    < 100 N
  • Screws included in the scope of delivery
    none
  • Customer variations
    On request
  • Flammability rating
    V0
  • Outer sheath, material
    PVC
  • Number of positions of theconnectors
    4
  • Operating voltage
    24 V (Typical power supply at the motor)
  • Recommended adaptation time
    600 ms
  • Lock recognition
    available
  • Resistance range
    650 Ω ... 1450 Ω
  • Application
    For charging with alternating current (AC) and with direct current (DC)
  • Note on the connection method
    Crimp connection, cannot be disconnected
  • Conductor length
    2 m (AC cables)
  • Ambient temperature (operation)
    -30 °C ... 50 °C
  • Type of charging current
    DC, AC 1-phase
  • Rated voltage for signal contacts
    30 V AC
  • Resistor coding
    4.7 kΩ (between PE and PP)
  • Insertion force
    < 100 N
  • Required mounting screws
    M6
  • Material
    Plastic
  • Locking type
    Locking in the inserted state with a locking mechanism
  • Cable resistance
    ≤ 37.1 Ω/km
  • External sheath, color
    Green-yellow
  • Maximum voltage for locking detection
    30 V
  • Typical motor current for locking
    0.05 A
  • Reverse current of the motor
    max. 0.5 A
  • Tolerance at the sensor with the recommended measured current
    ±5K
  • ECLASS 9.0
    27144706
  • Type
    Locking actuator right
  • Note
    A protective cap is supplied as standard for the DC and AC contacts.
  • Depth
    128.4 mm
  • Maximum charging power
    250 kW
  • Number of signal contacts
    2 (CP, PP)
  • Rated voltage for power contacts
    250 V AC
  • Temperature monitoring
    AC contacts: PTC chain (DIN˽EN˽60738-1)
  • Insertion/withdrawal cycles
    > 10000
  • Restrictions to mounting position
    Only 0 to 90 degree frontal inclination possible, see figure
  • Design line
    Generation 4
  • Housing color
    black
  • Cable structure
    4 x 0.5 mm²
  • Cable weight
    7 kg/km
  • Possible power supply range at the motor
    22 V ... 26 V
  • Pause time after entry or exit path
    3 s
  • Recommended measured current
    ≤ 1 mA (Umax= 16 V DC)
  • ECLASS 10.0.1
    27144706
  • Charging standard
    CCS type 2
  • Height
    140.25 mm
  • Bore dimensions
    117.65 mm x 90 mm, 117.65 mm x 83 mm
  • Degree of protection
    IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
  • Rated current of power contacts
    32 A AC
  • Rated current for signal contacts
    2 A
  • Type of signal transmission
    Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
  • Temperature measurement
    DC contacts: 2x PT1000 (DIN EN 60751)
  • Mounting position of the locking actuator
    Right-side
  • Mounting hole diameter
    6.80 mm (ø)
  • Material surface of contacts
    Ag
  • External cable diameter
    1.6 mm -0.2 mm
  • Minimum bending radius
    15 mm
  • Single wire, color
    black PP/CS
  • Max. dwell time with reverse current
    1 s
  • Mechanical emergency release
    available
  • Cable length
    0.5 m
  • Temperature range
    -40 °C ... 130 °C
  • Standards/regulations
    DIN EN 60751
  • Service life insertion cycles
    > 10000 load cycles
  • Type of sensor
    Pt 1000
  • ECLASS 11.0
    27144706

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo