1164420 Phoenix Contact Electrical Wires & Cables

1164420 Product Details

• Type
  Combination of infrastructure charging socket, protective cover, and rear protective cap for strain relief and touch protection
• Charging mode
  Mode 3, Case B
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Number of power contacts
  5 (L1, L2, L3, N, PE)
• Design
  Generation 2 Basic
• Bore dimensions
  60 mm x 60 mm
• Degree of protection
  IP44 (plugged in)
• Rated current for signal contacts
  2 A
• Application
  For charging electric vehicles (EV) with alternating current (AC)
• Standards/regulations
  IEC 62196-2
• Note on the connection method
  Connection via spade connector, separable
• Width
  75 mm
• Max. altitude
  5000 m (above sea level)
• Number of signal contacts
  2 (CP, PP)
• Rated voltage for power contacts
  480 V AC
• Restrictions to mounting position
  Only 0 to 90 degree frontal inclination possible, see figure
• Possible mounting positions
  Rear panel mounting
• Required mounting screws
  M5 thread
• Screws included in the scope of delivery
  none
• Charging standard
  Type 2
Depth
87.95 mm (with attachable cap for strain relief and touch protection, see accessories)
Maximum charging power
22 kW
Number of phases
3
Rated current of power contacts
32 A
Withdrawal force
< 100 N
Screw connection of a protective cover
Only rear mounting possible
Design line
Generation 2 Basic
Number of positions of theconnectors
3
Max. dwell time with reverse current
4 s
Service life insertion cycles
> 10000 load cycles
Mechanical emergency release
available
ECLASS 11.0
27144706
Affixed logo
“PHOENIX CONTACT” logo
Height
112.54 mm
Type of conductor
without cable
Ambient temperature (operation)
-30 °C ... 50 °C
Type of charging current
AC 3-phase
Rated voltage for signal contacts
30 V AC
Insertion force
< 100 N
Mounting hole diameter
7.00 mm (ø)
Locking type
Locking in the inserted state with a locking mechanism
Operating current
< 1.8 A
Pause time after entry or exit path
8x (ton, typical)
China RoHS
Environmentally Friendly Use Period = 10;
Type of signal transmission
Pulse width modulation
Mounting position of the locking actuator
Top center
Housing color
black
Operating voltage
12 V (Typical power supply at the motor)
Reverse current of the motor
max. 2.4 A (Stall current)
Cable structure
3 x 0.5 mm²
REACh SVHC
Lead 7439-92-1
Insertion/withdrawal cycles
> 10000
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Material surface of contacts
Ag
Material
Plastic
Recommended triggering time
200 ms ... 10 s (ton, typical)
Cable length
0.5 m
Lock recognition
available
ECLASS 10.0.1
27144706
Possible power supply range at the motor
9 V ... 15.5 V
Typical motor current for locking
250 mA Average run current
Lock setting
LOCK (Lever in horizontal position)
ECLASS 9.0
27144706

Product condition