1164417 Phoenix Contact Electrical Wires & Cables

1164417 Product Details

• Design
  Generation 2 Basic
• Charging mode
  Mode 3, Case B
• Type
  Combination of infrastructure charging socket, protective cover, and rear protective cap for strain relief and touch protection
• Height
  91.71 mm
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Type of charging current
  AC 3-phase
• Rated voltage for power contacts
  480 V AC
• Insertion/withdrawal cycles
  > 10000
• Max. wall thickness
  max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
• Design line
  Generation 2 Basic
• Affixed logo
  “PHOENIX CONTACT” logo
• Note on the connection method
  Connection via spade connector, separable
• Type of conductor
  without cable
• Maximum charging power
  22 kW
• Number of power contacts
  5 (L1, L2, L3, N, PE)
• Rated current of power contacts
  32 A
• Possible mounting positions
  Rear panel mounting
• Required mounting screws
  M5 thread
• Material surface of contacts
  Ag
• Maximum voltage for locking detection
  30 V
Max. dwell time with reverse current
1000 ms
Service life insertion cycles
> 10000 load cycles
ECLASS 11.0
27144706
Application
For charging electric vehicles (EV) with alternating current (AC)
Charging standard
Type 2
Width
75 mm
Max. altitude
5000 m (above sea level)
Degree of protection
IP44 (plugged in)
Rated voltage for signal contacts
30 V AC
Type of signal transmission
Pulse width modulation
Mounting hole diameter
7.00 mm (ø)
Screws included in the scope of delivery
none
Number of positions of theconnectors
4
Typical motor current for locking
0.2 A
Cable length
0.5 m
China RoHS
Environmentally Friendly Use Period = 10;
Standards/regulations
IEC 62196-2
Depth
87.95 mm (with attachable cap for strain relief and touch protection, see accessories)
Bore dimensions
60 mm x 60 mm
Rated current for signal contacts
2 A
Withdrawal force
< 100 N
Mounting position of the locking actuator
Top center
Housing color
black
Operating voltage
12 V (Typical power supply at the motor)
Pause time after entry or exit path
3 s
Cable structure
4 x 0.5 mm²
REACh SVHC
Lead 7439-92-1
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Number of phases
3
Number of signal contacts
2 (CP, PP)
Insertion force
< 100 N
Screw connection of a protective cover
Only rear mounting possible
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Material
Plastic
Locking type
Locking in the inserted state with a locking mechanism
Reverse current of the motor
max. 1 A
Mechanical emergency release
available
ECLASS 10.0.1
27144706
Possible power supply range at the motor
9 V ... 16 V
Recommended adaptation time
600 ms
Lock recognition
available
ECLASS 9.0
27144706

Product condition