1130335 Phoenix Contact Electrical Wires & Cables

1130335 Product Details

• Affixed logo
  “PHOENIX CONTACT” logo
• Depth
  267 mm (Vehicle charging connector)
• Stripping length
  140 mm ±10 mm
• Degree of protection
  IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
• Rated current for signal contacts
  2 A
• Rated voltage for signal contacts
  30 V AC
• Housing color
  black
• Flammability rating
  V0
• Wiring class
  Class 6
• Cable resistance
  ≤ 0.000272 Ω/m (based on a power core, at an ambient temperature of 20°C)
• Cable weight
  max. 2300 kg/km
• Temperature range
  -50 °C ... 130 °C
• ECLASS 11.0
  27144705
• Type
  DC charging cable
• Standards/regulations
  DIN EN 60751
• Charging mode
  Mode 4
• Conductor length
  10 m
• Number of power contacts
  3 (PE, DC+, DC-)
• Maximum charging power
  250 kW
• Type of signal transmission
  Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
Insertion force
< 100 N
Mating face color
black
Material mating face
Plastic
Material surface of contacts
Ag
External cable diameter
32 mm ±0.4 mm
Recommended measured current
1 mA (1 V at 0°C)
REACh SVHC
Lead 7439-92-1
Design
D-Line 1.1
Normative cable length restrictions
NOTE: The cable length exceeds the normative specification of 10 m.
Max. altitude
5000 m (above sea level)
Number of signal contacts
2 (CP, PP)
Note on the connection method
Crimp connection, cannot be disconnected
Temperature monitoring
2x Pt 1000
Label
14.1 mm x 44.8 mm (customer logo on request)
Housing material
Plastic
Wiring certifications
VDE-Reg. 8798
External sheath, color
black
Temperature coefficient (TCR)
3850 ppm/K
ECLASS 9.0
27144705
Charging standard
CCS type 2
Ambient temperature (operation)
-30 °C ... 50 °C
Rated voltage for power contacts
1000 V DC
Resistor coding
1500 Ω (between PE and PP)
Withdrawal force
< 100 N
Color handle area
gray
Cable structure
2 x 70 mm² + 1 x 35 mm² + 3 x 2 x 0.75 mm²
Type of conductor
straight
Outer sheath, material
TPE-U
Type of sensor
Pt 1000
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
China RoHS
Environmentally Friendly Use Period = 10;
Application
For charging electric vehicles (EV) with direct current (DC)
Height
139 mm (Vehicle charging connector)
Width
75 mm (Vehicle charging connector)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Rated current of power contacts
250 A
Insertion/withdrawal cycles
> 10000
Design line
Standard
Material handle area
Soft plastic
Wiring standards/regulations
DIN EN 50620
Minimum bending radius
320 mm (10 x diameter)
Tolerance at the sensor with the recommended measured current
±1K
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ECLASS 10.0.1
27144705

Product condition