1106945 Phoenix Contact Electrical Wires & Cables

1106945 Product Details

• Type
  DC charging cable
• Design
  D-Line 1.1
• Width
  75 mm (Vehicle charging connector)
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Rated current of power contacts
  80 A
• Type of signal transmission
  Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
• Insertion/withdrawal cycles
  > 10000
• Temperature monitoring
  2x Pt 1000
• External sheath, color
  black
• Label
  14.1 mm x 44.8 mm (customer logo on request)
• Type of conductor
  straight
• Cable weight
  max. 820 kg/km
• Long-term stability (max. R0-Drift)
  0.06 % (After 1000 hours at 130°C)
• China RoHS
  Environmentally Friendly Use Period = 10;
• Affixed logo
  “PHOENIX CONTACT” logo
• Depth
  267 mm (Vehicle charging connector)
• Degree of protection
  IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
• Rated voltage for signal contacts
  30 V AC
• Resistor coding
  1500 Ω (between PE and PP)
• Mating face color
  black
Material mating face
Plastic
Wiring standards/regulations
prEN 50620 / DIN EN 50620
Type of sensor
Pt 1000
ECLASS 10.0.1
27144705
Charging mode
Mode 4
Ambient temperature (operation)
-30 °C ... 50 °C
Stripping length
140 mm ±10 mm
Rated voltage for power contacts
1000 V DC
Insertion force
< 100 N
Color handle area
black
Flammability rating
V0
External cable diameter
21.2 mm ±0.4 mm
Outer sheath, material
TPE-U
Recommended measured current
1 mA (1 V at 0°C)
Temperature coefficient (TCR)
3850 ppm/K
ECLASS 9.0
27144705
Application
For charging electric vehicles (EV) with direct current (DC)
Normative cable length restrictions
NOTE: Cable management may be required.
Height
139 mm (Vehicle charging connector)
Number of power contacts
3 (PE, DC+, DC-)
Number of signal contacts
2 (CP, PP)
Rated current for signal contacts
2 A
Withdrawal force
< 100 N
Housing color
black
Cable structure
3 x 16 mm² + 3 x 2 x 0.75 mm²
Wiring class
Class 6
Minimum bending radius
212 mm (10 x diameter)
Tolerance at the sensor with the recommended measured current
±1K
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
Charging standard
CCS type 2
Standards/regulations
DIN EN 60751
Conductor length
6 m
Max. altitude
5000 m (above sea level)
Maximum charging power
80 kW
Note on the connection method
Crimp connection, cannot be disconnected
Design line
Standard
Housing material
Plastic
Material handle area
Plastic
Cable resistance
≤ 0.00121 Ω/m (based on a power core, at an ambient temperature of 20°C)
Temperature range
-50 °C ... 130 °C
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27144705

Product condition