1089154 Phoenix Contact Data & Networking Devices

1089154 Product Details

• Free from substances that could impair the application of coating
  Yes
• UL, USA
  UL 61010-1, Ed. 3
• ECLASS 10.0.1
  19170401
• Vibration (storage/transport)
  5g, 150 Hz, in acc. with IEC 60068-2-6
• Noxious gas test
  ISA S71.04.2013 G3 Harsh Group A
• ECLASS 9.0
  19170106
• China RoHS
  Environmentally Friendly Use Period = 50 years
• Shock (operation)
  30g (EN 60068-2-27)
• ECLASS 11.0
  19170401
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Air pressure (operation)
  79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
• Transmission speed
  100/1000 Mbps (full duplex)
• Redundancy
  MRP (Media Redundancy Protocol)
• PROFINET conformance class
  Conformance-Class B
• Signal contact control voltage
  typ. 24 V DC
• Supply voltage
  24 V DC (redundant)
• Type AX
  Block design
• Special properties
  PROFINET mode preset, PROFINET status LEDs
• MTTF
  238.46 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Conductor cross section flexible min.
0.2 mm²
Immunity to surge
EN 61000-6-2 EN 61000-4-5 (surge) Criterion A
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2
Width
214 mm
Ambient temperature (operation)
-40 °C ... 70 °C
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Interface
SFP module
Transmission physics
Depending on the SFP module
Management
Web-based management (HTTP/HTTPS)
PROFINET device function
PROFINET device
Maximum conductor length (twisted pair)
100 m
Mounting type
DIN rail
Material base plate
Die-cast aluminum, corrosion-resistant
Conductor cross section AWG min.
24
Immunity to ESD
EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
Immunity to burst
EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A
Immunity to conducted interference
EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
REACh SVHC
Lead 7439-92-1
Depth
69 mm
Air pressure (storage/transport)
79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
No. of ports
2 (SFP ports)
Configuration memory
max. 8 GByte (SD card)
Filter functions
Quality of Service (8 priority classes)
Status and diagnostic indicators
LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (link/activity and speed), PROFINET status LEDs (BF, SF)
Cascading depth
Network, linear, and star structure: any
Typical current consumption
460 mA (at US = 24 V DC and 25 °C ambient temperature)
Max. current consumption
680 mA (US = min, Tamb = max)
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG max.
16
Immunity to EF
EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A
Height
110 mm
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Note on the connection method
Auto negotiation and autocrossing
Basic functions
Store-and-forward switch, complies with IEEE 802.3
Additional functions
Jumbo frames (Max. 9,600 bytes)
IP parameterization
DHCP-Client
Port security
MAC-based, RADIUS (IEEE 802.1X)
Supply voltage range
19.2 V DC ... 32 V DC
Net weight
1035 g
Note
Support by phone or on-site (fee is charged)
Connection method
Push-in spring connection
Stripping length
10 mm
Interference emission
EN 61000-6-2 EN 61000-6-4 (interference) Class A
Type of test
Free fall in accordance with EN 61131-2
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
UL, Canada
CSA C22.2 NO. 61010-1-12, Ed. 3
Degree of protection
IP20
Degree of pollution
2
Transmission length
up to 80 km (depending on the SFP module used)
Signal LEDs
Data receive, link status
Diagnostic functions
RMON History
MAC address table
8k
Time synchronization
SNTP (Simple Network Time Protocol)
Residual ripple
3.6 VPP (within the permitted voltage range)
Housing material
Stainless steel 1.4301
Conductor cross section solid max.
1.5 mm²
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Conducted noise emission
EN 61000-6-2 EN 61000-6-4 (conducted interference) Class A

Product condition