1085622 Phoenix Contact Electrical Wires & Cables

1085622 Product Details

• Maximum charging power
  180 kW
• Design line
  Standard
• Design
  Generation 2
• Conductor length
  6 m
• Number of power contacts
  3 (PE, DC+, DC-)
• Rated current for signal contacts
  20 A ((A+, A-))
• Note on the connection method
  Crimp connection, cannot be disconnected
• Color handle area
  gray
• Label
  14.1 mm x 44.8 mm (customer logo on request)
• Material handle area
  Soft plastic
• Wiring standards/regulations
  GB/T 33594-2017
• External cable diameter
  33.1 mm ±0.4 mm
• Locking detection
  Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
• Long-term stability (max. R0-Drift)
  0.06 % (After 1000 hours at 130°C)
• ECLASS 10.0.1
  27144705
• ETIM 7.0
  EC002897
• Housing material
  Plastic
• Standards/regulations
  DIN EN 60751
• Charging standard
  GB/T
• Stripping length
  150 mm ±20 mm
Max. altitude
5000 m (above sea level)
Type of signal transmission
according to GB/T 27930-2015
Insertion/withdrawal cycles
> 10000
Mating face color
black
Customer variations
On request
Material mating face
Plastic
Wiring certifications
CQC1105-2015
Cable resistance
≤ 0.000386 Ω/m (based on a power core, at an ambient temperature of 20°C)
External sheath, color
black
Recommended measured current
1 mA (1 V at 0°C)
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ECLASS 11.0
27144705
Type
DC charging cable
Charging mode
Mode 4
Width
77 mm (Vehicle charging connector)
Ambient temperature (operation)
-30 °C ... 50 °C
Rated voltage for power contacts
1000 V DC
Rated voltage for signal contacts
30 V
Temperature monitoring
2x Pt 1000
Withdrawal force
< 100 N
Color protective cap
black
Actuating lever material
Metal
Cable structure
2 × 50 mm² + 1 × 25 mm² + 2 × 4 mm² + (2 × 0.75 mm²) P + 10 × 0.75 mm²
Minimum bending radius
165.5 mm (5 x diameter)
Current supply duration
50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
Temperature range
-50 °C ... 130 °C
China RoHS
Environmentally Friendly Use Period = 10;
ETIM 6.0
EC002897
Affixed logo
“PHOENIX CONTACT” logo
Height
137.8 mm (Vehicle charging connector)
Depth
279.4 mm (Vehicle charging connector)
Rated current of power contacts
180 A
Insertion force
< 100 N
Housing color
black
Actuating element color
black
Flammability rating
V0
Wiring class
Class 5/6
Outer sheath, material
TPU
Locking current
2 A
Tolerance at the sensor with the recommended measured current
±1K
Temperature coefficient (TCR)
3850 ppm/K
Application
For charging electric vehicles (EV) with direct current (DC)
Normative cable length restrictions
NOTE: Cable management may be required.
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Number of signal contacts
6 (S+, S-, A+, A-, CC1, CC2)
Resistor coding
1000 Ω (between PE and CC1 / PE and CC2)
Material protective cap
Plastic
Material surface of contacts
Ag
Type of conductor
straight
Locking type
Locking option for actuating lever with actuators integrated in the Vehicle Connector
Type of sensor
Pt 1000
ECLASS 9.0
27144705

Product condition