1085617 Phoenix Contact Electrical Wires & Cables

1085617 Product Details

• Material mating face
  Plastic
• Type
  DC charging cable
• Width
  77 mm (Vehicle charging connector)
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Max. altitude
  5000 m (above sea level)
• Temperature monitoring
  2x Pt 1000
• Insertion force
  < 100 N
• Actuating element color
  black
• Material handle area
  Soft plastic
• Charging standard
  GB/T
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Number of power contacts
  3 (PE, DC+, DC-)
• Number of signal contacts
  6 (S+, S-, A+, A-, CC1, CC2)
• Resistor coding
  1000 Ω (between PE and CC1 / PE and CC2)
• Withdrawal force
  < 100 N
• Housing color
  black
• Material protective cap
  Plastic
• Cable structure
  2 × 50 mm² + 1 × 25 mm² + 2 × 4 mm² + (2 × 0.75 mm²) P + 10 × 0.75 mm²
• Cable resistance
  ≤ 0.000386 Ω/m (based on a power core, at an ambient temperature of 20°C)
• Minimum bending radius
  165.5 mm (5 x diameter)
Recommended measured current
1 mA (1 V at 0°C)
ECLASS 11.0
27144705
ETIM 7.0
EC002897
Design
Generation 2
Charging mode
Mode 4
Depth
279.4 mm (Vehicle charging connector)
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Rated voltage for power contacts
1000 V DC
Type of signal transmission
according to GB/T 27930-2015
Mating face color
black
Label
14.1 mm x 44.8 mm (customer logo on request)
Actuating lever material
Metal
Wiring class
Class 5/6
External cable diameter
33.1 mm ±0.4 mm
Locking type
Locking option for actuating lever with actuators integrated in the Vehicle Connector
Tolerance at the sensor with the recommended measured current
±1K
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
Application
For charging electric vehicles (EV) with direct current (DC)
Standards/regulations
DIN EN 60751
Conductor length
5.5 m
Maximum charging power
180 kW
Rated current for signal contacts
20 A ((A+, A-))
Note on the connection method
Crimp connection, cannot be disconnected
Design line
Standard
Color protective cap
black
Customer variations
On request
Flammability rating
V0
Type of conductor
straight
Locking current
2 A
Type of sensor
Pt 1000
China RoHS
Environmentally Friendly Use Period = 10;
ETIM 6.0
EC002897
Affixed logo
“PHOENIX CONTACT” logo
Normative cable length restrictions
NOTE: Cable management may be required.
Height
137.8 mm (Vehicle charging connector)
Stripping length
150 mm ±20 mm
Rated current of power contacts
180 A
Rated voltage for signal contacts
30 V
Insertion/withdrawal cycles
> 10000
Color handle area
gray
Housing material
Plastic
Material surface of contacts
Ag
Wiring certifications
CQC1105-2015
External sheath, color
black
Current supply duration
50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
Temperature range
-50 °C ... 130 °C
ECLASS 10.0.1
27144705
ECLASS 9.0
27144705
Wiring standards/regulations
GB/T 33594-2017
Outer sheath, material
TPU
Locking detection
Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
Temperature coefficient (TCR)
3850 ppm/K
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω

Product condition