1085604 Phoenix Contact Electrical Wires & Cables

1085604 Product Details

• Design
  Generation 2
• Width
  77 mm (Vehicle charging connector)
• Max. altitude
  5000 m (above sea level)
• Degree of protection
  IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
• Number of signal contacts
  6 (S+, S-, A+, A-, CC1, CC2)
• Resistor coding
  1000 Ω (between PE and CC1 / PE and CC2)
• Mating face color
  black
• Label
  14.1 mm x 44.8 mm (customer logo on request)
• Material mating face
  Plastic
• Material surface of contacts
  Ag
• Wiring certifications
  CQC1105-2015
• External sheath, color
  black
• Locking current
  2 A
• Recommended measured current
  1 mA (1 V at 0°C)
• ECLASS 9.0
  27144705
• Application
  For charging electric vehicles (EV) with direct current (DC)
• Standards/regulations
  DIN EN 60751
• Depth
  279.4 mm (Vehicle charging connector)
• Rated current of power contacts
  250 A
• Rated voltage for power contacts
  1000 V DC
Temperature monitoring
2x Pt 1000
Design line
Standard
Color handle area
gray
Housing material
Plastic
Flammability rating
V0
Type of conductor
straight
Locking type
Locking option for actuating lever with actuators integrated in the Vehicle Connector
Tolerance at the sensor with the recommended measured current
±1K
Temperature coefficient (TCR)
3850 ppm/K
ECLASS 11.0
27144705
Affixed logo
“PHOENIX CONTACT” logo
Stripping length
150 mm ±20 mm
Ambient temperature (operation)
-30 °C ... 50 °C
Type of signal transmission
according to GB/T 27930-2015
Insertion/withdrawal cycles
> 10000
Actuating element color
black
Material protective cap
Plastic
Cable structure
2 x 70 mm² + 1 x 25 mm² + 2 × 4 mm² + (2 × 0.75 mm²) P + 10 x 0.75 mm²
Wiring standards/regulations
GB/T 33594-2017
Minimum bending radius
174.5 mm (5 x diameter)
Type of sensor
Pt 1000
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
China RoHS
Environmentally Friendly Use Period = 10;
ETIM 6.0
EC002897
Charging standard
GB/T
Height
137.8 mm (Vehicle charging connector)
Conductor length
4 m
Number of power contacts
3 (PE, DC+, DC-)
Rated current for signal contacts
20 A ((A+, A-))
Rated voltage for signal contacts
30 V
Insertion force
< 100 N
Color protective cap
black
Material handle area
Soft plastic
Wiring class
Class 5/6
Cable resistance
≤ 0.000272 Ω/m (based on a power core, at an ambient temperature of 20°C)
Current supply duration
50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
Temperature range
-50 °C ... 130 °C
ECLASS 10.0.1
27144705
ETIM 7.0
EC002897
Type
DC charging cable
Charging mode
Mode 4
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Maximum charging power
250 kW
Note on the connection method
Crimp connection, cannot be disconnected
Withdrawal force
< 100 N
Housing color
black
Customer variations
On request
Actuating lever material
Metal
External cable diameter
34.9 mm ±0.4 mm
Outer sheath, material
TPU
Locking detection
Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω

Product condition