1085171 Phoenix Contact Data & Networking Devices

1085171 Product Details

• Height
  147.48 mm
• Depth
  98.43 mm
• Permissible humidity (storage/transport)
  5 % ... 95 % (non-condensing)
• No. of ports
  2 (SFP ports)
• Ambient temperature (operation)
  -10 °C ... 60 °C
• Transmission physics
  Depending on the SFP module
• Signal LEDs
  Data receive, link status
• Status and diagnostic indicators
  LEDs: US, link and activity per port
• Max. current consumption
  681 mA
• Type AX
  Stand-alone
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Air pressure (storage/transport)
  79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
• Air pressure (operation)
  79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
• Additional functions
  Autonegotiation
• Maximum conductor length (twisted pair)
  100 m
• Mounting type
  DIN rail
• MTTF
  59.2 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
• Degree of protection
  IP30
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Interface
  SFP module
MAC address table
4k
Supply voltage
24 V DC
Typical current consumption
30 mA
Connection method
Push-in spring connection
Conductor cross section flexible min.
0.2 mm²
Vibration (storage/transport)
5g, 150 Hz, in acc. with IEC 60068-2-6
Width
22.5 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Transmission speed
100/1000 Mbps (full duplex)
Note on the connection method
Auto negotiation and autocrossing
Basic functions
Unmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode
Cascading depth
Network, linear, and star structure: any
Net weight
170 g
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
12
ECLASS 10.0.1
19170402
Transmission length
up to 40 km (Depending on the fiber/SFP module used)
PROFINET conformance class
Conformance-Class A
Residual ripple
3.6 VPP (within the permitted voltage range)
Supply voltage range
9 V DC ... 32 V DC
Conductor cross section flexible max.
2.5 mm²
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
Conductor cross section solid max.
2.5 mm²
Stripping length
10 mm
ECLASS 9.0
19170106
Shock (operation)
30g (EN 60068-2-27)
Type of test
Free fall in accordance with EN 61131-2
Conductor cross section AWG min.
24
ECLASS 11.0
19170402

Product condition