1082538 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Insulating material
  PA
• Maximum load current
  21 A (with a 2.5 mm² conductor cross section)
• Nominal voltage UN
  450 V
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Number of levels
  1
• Maximum power dissipation for nominal condition
  0.56 W
• Maximum total current
  21 A
• Result of power-frequency withstand voltage test
  Test passed
• Setpoint
  1 N
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of thermal test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Static insulating material application in cold
  -60 °C
• Height
  17.7 mm
• Potentials
  1
• Rated surge voltage
  6 kV
Insulating material group
I
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35/NS 15
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Shock test result
Test passed
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Color
turquoise
Flammability rating according to UL 94
V0
Overvoltage category
III
Open side panel
No
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Short-time current
0.3 kA
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Shock form
Half-sine
Nominal cross section
1.5 mm²
Degree of pollution
3
Nominal current IN
17.5 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Connection method
Push-in connection
Width
4.2 mm
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
ECLASS 4.1
27141120
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Result of voltage-drop test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section AWG max.
14
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A1 / B1
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 4.0
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Conductor cross section short circuit testing
2.5 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Length
21.6 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 2.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 11
39121410