Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

1078801 Phoenix Contact Relays

Phoenix Contact 1078801 PLC-INTERFACE for high switch-on currents, consisting of PLC-BPT.../1 IC/ACT basic terminal block with push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, max. switch-on current up to 130 A, 1 N/O contact, input voltage 12 
Phoenix Contact

Part#:1078801

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: PLC-INTERFACE for high switch-on currents, consisting of PLC-BPT.../1 IC/ACT basic terminal block with push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, max. switch-on current up to 130 A, 1 N/O contact, input voltage 12 

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 1078801 Phoenix Contact price in the box on the right side or send a quick quote.

1078801 Product Details

  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Height
    80 mm
  • Maximum altitude
    ≤ 2000 m
  • Coil voltage
    12 V DC
  • Power dissipation for nominal condition
    0.4 W
  • Minimum switching voltage
    12 V (at 100 mA)
  • Maximum inrush current
    80 A (for 20 ms)
  • Switching capacity
    2 A (at 24 V, DC13)
  • Assembly instructions
    In rows with zero spacing
  • Conductor cross section flexible
    0.14 mm² ... 2.5 mm²
  • Width
    14 mm
  • Degree of protection
    RT II (Relay)
  • Typical response time
    8 ms
  • Contact type
    1 N/O contact
  • Type of switch contact
    Single contact
  • Min. switching current
    100 mA (at 12 V DC)
  • Interrupting rating (ohmic load) max.
    144 W (at 24 V DC)
  • Test voltage
    4 kV AC (50 Hz, 1 min., winding/contact)
  • Connection method
    Push-in connection
  • Designation
    Corrosive gas test
  • Overvoltage category
    III
  • Identification
    ISA-S71.04. G3 Harsh Group
  • ECLASS 9.0
    27371601
  • Type of note
    Notes on operation
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Typical input current at UN
    33 mA
  • Protective circuit
    Reverse polarity protection Polarity protection diode
  • Contact material
    AgSnO2
  • Limiting continuous current
    6 A
  • Interrupting rating (ohmic load) max. bridged
    240 W (for 24 V DC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.)
  • Flammability rating according to UL 94
    V0 (Housing)
  • Connection name
    Contact side
  • Ambient temperature (operation)
    -40 °C ... 60 °C
  • Mechanical service life
    3x 107 cycles
  • Conductor cross section solid
    0.14 mm² ... 2.5 mm²
  • Standards/regulations
    EN 50178
  • Rated surge voltage
    6 kV
  • ECLASS 11.0
    27371601
  • ETIM 7.0
    EC001437
  • Note
    The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
  • Depth
    94 mm
  • Nominal input voltage UN
    12 V DC
  • Typical release time
    10 ms
  • Operating voltage display
    Yellow LED
  • Maximum switching voltage
    250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
  • Switching capacity min.
    1200 mW
  • Operating mode
    100% operating factor
  • Mounting position
    any
  • Stripping length
    8 mm
  • Rated insulation voltage
    250 V AC
  • Insulation
    Safe isolation, reinforced insulation
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ETIM 6.0
    EC001437
  • Conductor cross section AWG
    26 ... 14
  • Pollution degree
    2
  • ECLASS 10.0.1
    27371601
  • REACh SVHC
    Lead 7439-92-1

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo