1073674 Phoenix Contact Electrical Wires & Cables

1073674 Product Details

• Application
  For charging electric vehicles (EV) with direct current (DC)
• Charging mode
  Mode 4
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Maximum charging power
  125 kW
• Rated current of power contacts
  125 A
• Type of signal transmission
  according to GB/T 27930-2015
• Note on the connection method
  Crimp connection, cannot be disconnected
• Design line
  Standard
• Housing color
  black
• Customer variations
  On request
• Housing material
  Plastic
• Material surface of contacts
  Ag
• Cable structure
  2 x 35 mm² + 1 x 25 mm² + 2 × 4 mm² + (2 × 0.75 mm²) P + 10 x 0.75 mm²
• Outer sheath, material
  TPU
• Locking current
  2 A
• Tolerance at the sensor with the recommended measured current
  ±1K
• China RoHS
  Environmentally Friendly Use Period = 10;
• ETIM 6.0
  EC002897
• Affixed logo
  “PHOENIX CONTACT” logo
• Normative cable length restrictions
  NOTE: Cable management may be required.
Stripping length
150 mm ±20 mm
Number of signal contacts
6 (S+, S-, A+, A-, CC1, CC2)
Rated current for signal contacts
20 A ((A+, A-))
Temperature monitoring
2x Pt 1000
Actuating element color
black
Color protective cap
black
Actuating lever material
Metal
Wiring certifications
CQC1105-2015
External cable diameter
31.6 mm ±0.4 mm
Minimum bending radius
158 mm (5 x diameter)
Temperature coefficient (TCR)
3850 ppm/K
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
Standards/regulations
DIN EN 60751
Height
137.8 mm (Vehicle charging connector)
Conductor length
8 m
Number of power contacts
3 (PE, DC+, DC-)
Resistor coding
1000 Ω (between PE and CC1 / PE and CC2)
Mating face color
black
Material handle area
Soft plastic
Wiring standards/regulations
GB/T 33594-2017
Cable resistance
≤ 0.000554 Ω/m (based on a power core, at an ambient temperature of 20°C)
Locking detection
Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
Temperature range
-50 °C ... 130 °C
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ECLASS 11.0
27144705
Design
Generation 2
Depth
279.4 mm (Vehicle charging connector)
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Max. altitude
5000 m (above sea level)
Rated voltage for power contacts
1000 V DC
Insertion/withdrawal cycles
> 10000
Insertion force
< 100 N
Color handle area
gray
Material protective cap
Plastic
Material mating face
Plastic
Wiring class
Class 5/6
Locking type
Locking option for actuating lever with actuators integrated in the Vehicle Connector
Recommended measured current
1 mA (1 V at 0°C)
ECLASS 10.0.1
27144705
ECLASS 9.0
27144705
Type
DC charging cable
Charging standard
GB/T
Width
77 mm (Vehicle charging connector)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Rated voltage for signal contacts
30 V
Withdrawal force
< 100 N
Label
14.1 mm x 44.8 mm (customer logo on request)
Flammability rating
V0
Type of conductor
straight
External sheath, color
black
Current supply duration
50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
Type of sensor
Pt 1000
ETIM 7.0
EC002897

Product condition