1073614 Phoenix Contact Electrical Wires & Cables

1073614 Product Details

• Design
  Generation 2
• Depth
  279.4 mm (Vehicle charging connector)
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Number of power contacts
  3 (PE, DC+, DC-)
• Rated voltage for power contacts
  1000 V DC
• Type of signal transmission
  according to GB/T 27930-2015
• Resistor coding
  1000 Ω (between PE and CC1 / PE and CC2)
• Withdrawal force
  < 100 N
• Label
  14.1 mm x 44.8 mm (customer logo on request)
• Affixed logo
  “PHOENIX CONTACT” logo
• Conductor length
  6 m
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Rated current for signal contacts
  20 A ((A+, A-))
• Insertion force
  < 100 N
• Mating face color
  black
• Actuating element color
  black
• Material handle area
  Soft plastic
• External cable diameter
  27 mm ±0.4 mm
• Type of conductor
  straight
• Locking detection
  Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ETIM 6.0
EC002897
Type
DC charging cable
Standards/regulations
DIN EN 60751
Normative cable length restrictions
NOTE: Cable management may be required.
Stripping length
150 mm ±20 mm
Rated current of power contacts
80 A
Note on the connection method
Crimp connection, cannot be disconnected
Design line
Standard
Customer variations
On request
Material mating face
Plastic
Wiring standards/regulations
GB/T 33594-2017
External sheath, color
black
Current supply duration
50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
Temperature range
-50 °C ... 130 °C
ECLASS 9.0
27144705
Application
For charging electric vehicles (EV) with direct current (DC)
Charging standard
GB/T
Height
137.8 mm (Vehicle charging connector)
Width
77 mm (Vehicle charging connector)
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Rated voltage for signal contacts
30 V
Insertion/withdrawal cycles
> 10000
Color handle area
gray
Housing material
Plastic
Cable structure
3 x 16 mm² + 2 x 4 mm² + (2 × 0.75 mm²) P + 10 x 0.75 mm²
Wiring class
Class 5/6
Locking type
Locking option for actuating lever with actuators integrated in the Vehicle Connector
Recommended measured current
1 mA (1 V at 0°C)
Type of sensor
Pt 1000
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
Charging mode
Mode 4
Max. altitude
5000 m (above sea level)
Maximum charging power
80 kW
Number of signal contacts
6 (S+, S-, A+, A-, CC1, CC2)
Temperature monitoring
2x Pt 1000
Housing color
black
Color protective cap
black
Material protective cap
Plastic
Flammability rating
V0
Outer sheath, material
TPU
Locking current
2 A
Temperature coefficient (TCR)
3850 ppm/K
ECLASS 10.0.1
27144705
ETIM 7.0
EC002897
Actuating lever material
Metal
Material surface of contacts
Ag
Wiring certifications
CQC1105-2015
Cable resistance
≤ 0.00121 Ω/m (based on a power core, at an ambient temperature of 20°C)
Minimum bending radius
135 mm (5 x diameter)
Tolerance at the sensor with the recommended measured current
±1K
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 11.0
27144705

Product condition